It is currently Thu 28. Mar 2024 23:22:12

All times are UTC + 1 hour





Post new topic Reply to topic  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Re: BEC test failed
PostPosted: Tue 22. Jan 2019 11:27:37 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

that is very sad.

I guess that some servo or BEC did not survived the load which is very strange. For sure this would happen sooner or later without BEC test too.
Only in case of too high frequency this could happen. But usually with an analogue servos or old Align/Savox servos that are not designed to be used at FBL helicopters.

But it is very strange that everything was damaged. The most probably is I guess BEC failure which then sent too high voltage to the electronics. Just Spirit unit can survive quite high voltages.

Can you write what ESC and servos were used?

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: BEC test failed
PostPosted: Tue 22. Jan 2019 14:28:51 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
I am afraid but these servos are very insufficient for a FBL units. The performance would be very poor in any case.
They should be equipped with coreless motor. For example at least TGY-306G for swashplate.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .