It is currently Fri 29. Mar 2024 12:31:09

All times are UTC + 1 hour





Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 25. Nov 2020 20:09:12 
Offline

Joined: Fri 13. Sep 2019 1:20:17
Posts: 21
I have a Spirit which will not enter Bind mode.

I have a proper connection to the software (3.2 on software and firmware), I have started the Wizard and selected 'dsmx,' I have disconnected the usb cable, put a bind plug in ele/pit/ail, and repowered, and the sat will not rapid flash.

Any ideas?


Top
 Profile  
 
PostPosted: Wed 25. Nov 2020 20:13:58 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Binding will not work until Spirit unit will be operating normally. Now it is in recovery mode. Once firmware is flashed properly, binding satellite should work too.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 25. Nov 2020 20:20:50 
Offline

Joined: Fri 13. Sep 2019 1:20:17
Posts: 21
It's a different Spirit unit, sir. I have multiple.

2 are on helis and work great
1 is in recovery mode currently
1 is being prepped to be put on a heli and is having the BIND issue


Top
 Profile  
 
PostPosted: Wed 25. Nov 2020 23:00:54 
Offline

Joined: Fri 13. Sep 2019 1:20:17
Posts: 21
Please help me out

2 units in good working order are unable to bind. Im sure its something I'm doing wrong, but I've tried everything.

sats will not go into bind mode (they do one quick flash and that's it)


Top
 Profile  
 
PostPosted: Thu 26. Nov 2020 14:26:18 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

you might try version 3.2.1 that was released right now.
I hope it can help you.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 26. Nov 2020 15:28:52 
Offline

Joined: Fri 13. Sep 2019 1:20:17
Posts: 21
Thank you VERY much. I’ll give it a try


Top
 Profile  
 
PostPosted: Thu 26. Nov 2020 16:14:43 
Offline

Joined: Fri 13. Sep 2019 1:20:17
Posts: 21
It still will not enter bind mode. Satellite gives one quick blink and that's all.

Should I try an older firmware and software which allows binding?


Top
 Profile  
 
PostPosted: Thu 26. Nov 2020 17:08:16 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Oh, this mean that there is no problem with firmware. But very likely your Receiver type is not set to Spektrum DSM2/X.
Only then binding will work.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 26. Nov 2020 18:09:20 
Offline

Joined: Fri 13. Sep 2019 1:20:17
Posts: 21
Hi,

Ive selected DSMX under receiver type many times. I've even tried running the wizard to the end and saved the settings first, then tried binding.

I've really tried everything. I've tried different sats, different wire, different usb cable, different power sources.

I've followed the instructions to the letter and I'm running out of ideas here.


Top
 Profile  
 
PostPosted: Thu 26. Nov 2020 18:16:20 
Offline

Joined: Fri 13. Sep 2019 1:20:17
Posts: 21
I tried using another receiver and bound the sat to my transmitter that way. It bound, but then when I bring it over to the Spirit, there's no connection.

I just tried resetting both spirits to factory settings and saving the DSMX choice again.

still not working (not entering bind mode)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .