Spirit System https://www.spirit-system.com/phpBB3/ |
|
uSpirit severe tail wag - motorized tail https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=4352 |
Page 3 of 5 |
Author: | daniel_i [ Sun 25. Oct 2020 13:46:12 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
@ZeXx86 can you help here please? Sent from my iPhone using Tapatalk |
Author: | ZeXx86 [ Sun 25. Oct 2020 13:59:02 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
Hello, it should be at the P pin. With JST-Servo adapter it is middle pin, but without the adapter it is upper pin (pin where red wire is connected normally). Manual was corrected. |
Author: | daniel_i [ Sun 25. Oct 2020 14:00:23 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
ZeXx86 wrote: Hello, it should be at the P pin. With JST-Servo adapter it is middle pin, but without the adapter it is upper pin (pin where red wire is connected normally). This is what I used, but I don’t get any RPM.Manual was corrected. Sent from my iPhone using Tapatalk |
Author: | ZeXx86 [ Sun 25. Oct 2020 14:14:54 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
Is governor turned on or off? |
Author: | daniel_i [ Sun 25. Oct 2020 14:15:20 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
Governor on. Sent from my iPhone using Tapatalk |
Author: | daniel_i [ Sun 25. Oct 2020 14:25:01 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
ZeXx86 wrote: Is governor turned on or off? This should make it clearhttps://youtu.be/ujX-PHaEE6k Sent from my iPhone using Tapatalk |
Author: | daniel_i [ Mon 26. Oct 2020 13:57:26 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
Hi @ZeXx86 any info on this? What else can I try? Sent from my iPhone using Tapatalk |
Author: | ZeXx86 [ Mon 26. Oct 2020 15:51:32 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
Hello, we will try the same with our M2. It is only very busy time so at the moment we dont know what to do sooner.. I will let you know. |
Author: | daniel_i [ Wed 28. Oct 2020 17:44:34 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
Hopefully you will deal with this issue soon because the unit looks promising. I did some test flights and I can see some nice things with this unit. Unfortunately without a governor, RPM drops too much. I published a video to sum it up: |
Author: | daniel_i [ Sat 31. Oct 2020 22:50:47 ] |
Post subject: | Re: uSpirit severe tail wag - motorized tail |
ZeXx86 wrote: Hello, we will try the same with our M2. It is only very busy time so at the moment we dont know what to do sooner.. I will let you know. Hi, any update on this? Can I help in any way? How can I make sure that I don`t have a faulty unit or there is no software problem in reading the RPM? |
Page 3 of 5 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |