It is currently Fri 29. Mar 2024 9:20:39

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 21. Jan 2020 0:11:12 
Offline

Joined: Wed 31. Jul 2019 17:20:38
Posts: 3
I'm trying to get Spirit2 set up with FrSKy XSR receiver's SBUS to Spirit2 RUD (along with S. Port from XSR to the FrSky Integration to SYS and daisy chained with Neuron's S. Port out wire)

Taranis shows all the telemetry data—including current and voltage (YES!) but throttle isn't working. In this setup, the Neuron 80a ESC throttle wire goes to Spirit2 AUX1; and the Neuron also has an S. Port output for various telemetry data (RPM, current, voltage, etc.) that I connected with FLVSS and the FrSKy Integration cable.

The SBUS goes from XSR to RUD; (I added extra RED wire from RUD to the S. Port plug from XSR and they plug into FrSky Integration Cable). The FrSky Integration goes to SYS, and has the telemetry devices kind of daisy chained in the middle.

I tested a larger X8R receiver and throttle works only if I put the throttle wire from Neuron into CH3 PWM port on X8R receiver (and SBUS directly to the Spirit2 AUX1, then S. Port on X8R to FrSky Integration and daisy chained telemetry). But that setup won't let me run Spirit2 governor (as far as I can tell).

Does anybody have suggestions? Is it possible to use Spirit2 for throttle governor using XSR SBUS connection?


Attachments:
File comment: SYS port has Y-Cable for programming and FrSky Integration cable
IMG_0112.jpg
IMG_0112.jpg [ 1.76 MiB | Viewed 375 times ]
File comment: Tried to label what these wires are doing
IMG_0105.jpg
IMG_0105.jpg [ 1.79 MiB | Viewed 376 times ]
File comment: XSR receiver with SBus and S. Port outputs
IMG_0101.jpg
IMG_0101.jpg [ 1.72 MiB | Viewed 406 times ]
Top
 Profile  
 
PostPosted: Tue 21. Jan 2020 22:25:25 
Offline

Joined: Thu 28. Aug 2014 17:01:01
Posts: 65
Sorry - my mistake


Top
 Profile  
 
PostPosted: Wed 22. Jan 2020 8:23:11 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

you have to connect ESC at the AUX1 port if you wish to use Governor.
Throttle output must be enabled in the General/Channels window by assigning Throttle channel (1).

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 10. Feb 2020 2:24:27 
Offline

Joined: Wed 31. Jul 2019 17:20:38
Posts: 3
Thank you. I think it is working; I have the ESC output plugged into Spirit2 AUX port. I will update soon whether the FrSKY Neuron works correctly or not with governor.


Top
 Profile  
 
PostPosted: Thu 14. May 2020 23:05:19 
Offline

Joined: Sun 03. May 2020 22:18:55
Posts: 12
Hello,

I also use the neuron ESC. My wiring is as described in this post. I use a taranis tranmitter, a x6r receiver ( futaba sbus), spirit pro 3.0.0 and the geolink Module. In my Transmitter i use the lua script for spirit configuration. The frsky esc is not listet in the menue for esc telemetry so i ordered a RPM sensor (Hobbywing RPM SENSOR HW86060041).
The usb connection is not working. If i disconnect the s. Port from My esc the USB connection works.
Is IT possible that there is conflict whith the telemetry ID. Idont wont to disconnect the esc every time if use the usb interface.
Can anyone help.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .