It is currently Thu 28. Mar 2024 20:49:24

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 19. Jan 2020 3:28:08 
Offline

Joined: Sat 14. Sep 2019 2:13:30
Posts: 17
I have a set of BK 5001 servos connected to my Spirit 2 for the cyclic of my new Synergy 516. If I set the frequency to 50 or 60hz they are very smooth and quiet. If I set the frequency to 333hz they are very loud and make a grinding noise. The Spirit 2 is connected to a Futaba R3004SB receiver via S.Bus2 and my transmitter is a 18SZ. If I connect the servos direct to the receiver they are smooth and quiet.

Here's a video of them at 333hz.

https://youtu.be/duX3L4LSFeU

Is there something wrong with the servos? Is there something wrong with my Spirit 2 setup? Is it safe to fly this way?


Top
 Profile  
 
PostPosted: Sun 19. Jan 2020 10:52:38 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
There is nothing wrong.
It is just because your receiver is transmitting data slower than the servos can react.
So servos are displaying what is just happening.
The only solution is to make data from radio to receiver faster. It might be improved with other futaba modulation that can transmit data faster.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sun 19. Jan 2020 13:43:16 
Offline

Joined: Sat 14. Sep 2019 2:13:30
Posts: 17
I tried using a r7008sb receiver this morning which runs FASSTest protocol. The results were exactly the same. Should I reduce the frequency rate from 333 to something lower?


Top
 Profile  
 
PostPosted: Sun 19. Jan 2020 20:16:10 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
FASSTest protocol might run at the very same frequency. Rather try to set just 7CH transmission, since MULT is slower.

The issue is actually not a problem at all. It is actually doing what it should. With the faster servos it will be more apparent. This is why lower frequency makes the problem invisible. 200 - 333Hz is correct settings.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .