Spirit System
https://www.spirit-system.com/phpBB3/

initial setup, really bad tail wag
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3672
Page 1 of 1

Author:  mcmoyer [ Sat 07. Dec 2019 21:47:50 ]
Post subject:  initial setup, really bad tail wag

Hi, I'm in the initial stages of getting my Spirit FBL set up on my 180CFX. Originally started with transmitter gyro gain of 60%. Tail was wagging violently before it ever got off the ground. Kept dropping it incrementally and it would stave off the tail wag for a bit longer each time. I've dropped it all the way down to 25% and still will randomly get it after trying a piro or two in normal mode with the slow head speed. This gyro setting seems awfully low and it seems like I still need to go lower. Do you know if this is common among other 180CFX users?

My multiplier is still set to 1.0x in the settings app.

I've attached my backup file if that's helpful at all.

Attachments:
180cfx.4ds [255 Bytes]
Downloaded 41 times

Author:  mcmoyer [ Tue 10. Dec 2019 3:05:09 ]
Post subject:  Re: initial setup, really bad tail wag

Oh man, I feel like an idiot! I had the wrong frequency set on my servos. The really bad part about this is that I distinctly remember setting that for the Spirit in my 450x...so it's not like I didn't know you had to do that.

At least you have another thing to add to your list of dumb customer settings now :)

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/