It is currently Thu 28. Mar 2024 22:25:48

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sat 31. Aug 2019 10:53:27 
Offline

Joined: Thu 01. Nov 2018 11:26:02
Posts: 51
Hi all,

I setup a new Soxos 600 and I have large vibration reading on the head and tail, you can see in the screenshot.
I disassembled the heli and actually like to handle the mainrotor vibrations. Also I attached a Vbar Blueline for comparison (I am using this more in the past and have better understanding how it works).
Attachment:
Vibanalyse.png
Vibanalyse.png [ 40.98 KiB | Viewed 245 times ]


After exchanging some components the Vbar has a constant reading and the Spirit goes up and down, you can see in the movie. This is without head and tail.
https://www.youtube.com/watch?v=wMiD75Bc1j8

Any ideas about it? I exchanged the Spirit with another unit and same behavior...

The second screenshot is with tail mounted but without blades. The readings are stable then but Vbar does not recognize it either.
Attachment:
31-08-_2019_11-49-03.png
31-08-_2019_11-49-03.png [ 139.56 KiB | Viewed 245 times ]


Regards,
Nils

PS. No advertisment for Vbar, but like to solve this issue (if it is one), so this is why I compared it. :-)


Last edited by augur on Mon 02. Sep 2019 7:14:06, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sun 01. Sep 2019 1:29:03 
Offline

Joined: Thu 24. Dec 2015 20:13:20
Posts: 157
Is that during an actual flight? With some 3d moves and hard stops or tick tocs or anything? Because you're always going to have spikes of high vibration when you are flying 3d.

If it's that high in a hover something else is going on. My vibrations are lower in a hover on my nitro machines.. But anything under 50 is fine to fly with and you shouldn't notice anything.


Top
 Profile  
 
PostPosted: Sat 07. Sep 2019 11:30:27 
Offline

Joined: Thu 01. Nov 2018 11:26:02
Posts: 51
Hi.

The first picture is during hover and the others from the bench.

I can feels the high tail Vibs also, so Vibs readings are fine. The strange video is without while tail on the bench, that’s is a little confusing.

Cheers
Nils


Top
 Profile  
 
PostPosted: Mon 09. Sep 2019 13:21:23 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hi,

vibration level of the tail is really high, but head looks good.
So I recommend to carefully check everything that is spinning at the same speed as tail rotor. It could be for example torque tube.

So what you can do is to remove everything from tail shaft. Then perform the analysis again and check the spike. For sure it will be smaller but it depends on how big it will be.

Spirit units can sense vibrations in higher quality and resolution for this reason you can see big difference.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .