| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Settings for slow tail servo https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3358 |
Page 1 of 1 |
| Author: | Bladecrasher [ Mon 17. Jun 2019 16:10:12 ] |
| Post subject: | Settings for slow tail servo |
I am setting up an old Align 600 cf on a Pro unit with current FM. It has older JR DS821 servos all around. They show.15 speed @6v on servodatabase.com. What settings do you suggest for the tail? I'm using the flybar mode option Thanks |
|
| Author: | ZeXx86 [ Thu 20. Jun 2019 13:52:02 ] |
| Post subject: | Re: Settings for slow tail servo |
Hello, for tail this servo is unfortunately very inadequate. So the performance will be very likely quite poor. I recommend to set Revomix to 4. Rudder Delay could be in range of 15 - 25 for good operation. Pirouette Consistency at 175. |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|