It is currently Tue 17. Sep 2019 3:10:08

All times are UTC + 1 hour





Post new topic Reply to topic  [ 69 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 18. Jul 2019 10:40:37 
Offline

Joined: Tue 03. Mar 2015 15:55:50
Posts: 71
Please be patient, he always comes thru, sometimes a little late.


Top
 Profile  
 
PostPosted: Thu 18. Jul 2019 12:34:12 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 8930
We are waiting for translations to be finished. There are things we can't affect.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 19. Jul 2019 16:36:13 
Offline

Joined: Sun 31. Jul 2016 21:54:17
Posts: 45
Congratulations Tomas and Team on V2.6.2 released this morning!
Thanks so much for all you do Tomas and the team as well.
Sincerely,
Dave

Link to V2.6.2 is here: http://spirit-system.com/phpBB3/viewtopic.php?f=19&t=3399


Top
 Profile  
 
PostPosted: Sat 20. Jul 2019 15:39:10 
Offline

Joined: Tue 16. Jun 2015 14:37:10
Posts: 37
Just had a quick fly of 2 6 2. I did some faster and faster drops and it recovered at the same height every time. I have it set at 7 metres and was upright at all times. I reckon after a few flights I would feel confident to take it to half that height. Good job Tomas etc.
Heed the warning about RTH. I don't have Banks but my Home position showing on the Map tab was different to the stored position even though the unit was talking to the software. Of course my pre fligh swash check showed the error. ;) Now to work out how to disarm the Alt Limit in my Jeti with a power failure ........


Top
 Profile  
 
PostPosted: Wed 24. Jul 2019 13:32:08 
Offline

Joined: Mon 15. Oct 2018 4:19:55
Posts: 53
Hi,

can anybody else confirm, that the Altitude Limit issue is fixed with version 2.6.2 ? I cannot test it by myself because the ESC of my heli is bricked at the moment.

Best Regards,
Eugen


Top
 Profile  
 
PostPosted: Thu 25. Jul 2019 3:09:40 
Offline

Joined: Wed 18. Jan 2017 20:36:20
Posts: 44
I have tried it many times over the weekend with 4 different Helis and it still doesn’t work . I think Tomas still needs a lot of work in programming the FBL . I tried it and several different speeds and it still blows through the set limit .


Top
 Profile  
 
PostPosted: Sat 27. Jul 2019 8:28:32 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 8930
Hi morrchew,

could you describe maneuver you are testing the Altitude Limit please? We will record video of how it should work :) Please do not credit me for all the work, since we are working as team for many years.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 27. Jul 2019 14:05:23 
Offline

Joined: Sun 10. Feb 2019 7:10:27
Posts: 74
morrchew wrote:
I have tried it many times over the weekend with 4 different Helis and it still doesn’t work . I think Tomas still needs a lot of work in programming the FBL . I tried it and several different speeds and it still blows through the set limit .

Could you post your settings? Use screen grab? I have found the rescue to be fairly reliable down to about 10ft. Beyond that you are pushing it.


Top
 Profile  
 
PostPosted: Sat 27. Jul 2019 20:09:39 
Offline

Joined: Mon 19. Feb 2018 22:12:47
Posts: 4
morrchew wrote:
I have tried it many times over the weekend with 4 different Helis and it still doesn’t work . I think Tomas still needs a lot of work in programming the FBL . I tried it and several different speeds and it still blows through the set limit .


Please provide us with more details on the issue you are seeing !!!


Top
 Profile  
 
PostPosted: Sun 28. Jul 2019 18:12:15 
Offline

Joined: Wed 18. Jan 2017 20:36:20
Posts: 44
From all my testing that i have done on the Altitude limit i have found the following.
On my Align 800 i have rescue set to 90% and triggering acceleration at the max setting of 10.
When doing a speed pass at a round 100km/h and descending rather quick and reaching my set limit which is at 10 meters the Heli will always rescue itself .
Now the problem i see is when i am at a hover and set my collective stick past 5degrees of negative pitch ,the Heli will go through the set limit, this is where i have to react quick enough and apply posative pitch so that it does not hit the ground (which has happened twice for me where the skids did lightly touch)
If i apply 0 to roughly 4 degrees of negative pitch the Heli will rescue itself and shoot the Heli up .
My question is ,is the Altitude Limit for the scale to novice flier whom is learning to fly at which a negative pitch would not be greater than the negative 4 degrees . Now for the more advanced flier whom is using more than the degrees specified above i find that the Heli will go through the set limit.
I do have the same problem on all the Helies tested a 550 , and a Oxy 4 with all the same results.
I should mention that when inverted and reaching the Altitude Limit the rescue works every time but only at a slow descent .
I am using the latest firmware 2.6.2 all other features work that I have tried . I also have 12 satellites which I believe is more than enough .There are no vibes or at least very low (10 ) being the highest . I see no difference from version 2.6.1 .
Can others chime in on there experiences and roughly what pitches do you see when it not activating properly.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 69 posts ]  Go to page Previous  1, 2, 3, 4, 5, 6, 7  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .