It is currently Thu 28. Mar 2024 18:39:00

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 09. May 2019 21:13:07 
Offline

Joined: Thu 09. May 2019 21:03:57
Posts: 20
Hello,
I have following configuration:
-Spirit Pro
-HobbyWing Platinum 50A V3
-Taranis X9D
-FRSky R-XSR Receiver

I have connected PRM from HW to PIT from the Spirit Pro.
Now I whant to have the RPM on my Taranis but I do not know how.
I will use the Governor from HW and not the one from the Spirit.
What settings I have to do on the Spirit System?

I couldn't find my anser in www. Hopefully you can help me.

Thanks
Best Regards
Serenus


Top
 Profile  
 
PostPosted: Fri 10. May 2019 7:23:21 
Offline

Joined: Wed 12. Sep 2018 18:34:47
Posts: 33
Hello,

You have to set the checkbox and activate governor in spirit. Then you can enter the gear ratio, pole counts (sensing divider). After that you can deactivate governor again, safe your settings and it should work just fine.


Top
 Profile  
 
PostPosted: Fri 10. May 2019 12:34:14 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
No need to activate Governor. You can set the parameters in the Telemetry window in the Advanced tab.
It is only needed to enable the telemetry there.

In any way you have to proceed according the OpenTX integration guide and connect FrSky integration cable.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 10. May 2019 15:52:13 
Offline

Joined: Thu 09. May 2019 21:03:57
Posts: 20
Hi,

but the HW Platinum V3 do not have telemetrie. I can olso only choose HW Platinum V4 not V3.
I have no connection to the side connector. I only have the RPM signal from the HW V3 connected to PIT.
If I activate the Govener in the Spirit I can see the under General -> Governor -> Governor -> RPM Meter the Requested and the current RPM. This is working. That means the Spirit gets the current RPM. But how to send this value to the taranis? If I search for telemetrie data I can only find RSSI and RxBT which is working.

@↓ZeXx86: does this mean I can only get the RPM on my Taranis with the Lua script?


Top
 Profile  
 
PostPosted: Fri 10. May 2019 16:56:39 
Offline

Joined: Thu 09. May 2019 21:03:57
Posts: 20
Do I have to connect the SYS from Spirit with the s.Port from the receiver? does this mean I can't use my bluetooth modul any more?


Top
 Profile  
 
PostPosted: Sat 11. May 2019 17:07:54 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
Yes, FrSky integration cable must be connected in any way.

ESC telemetry will be disabled for this ESC, but RPM will be still transmitted. Bluetooth module can be used, but you have to change cable in the SYS port.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 11. May 2019 19:57:50 
Offline

Joined: Thu 09. May 2019 21:03:57
Posts: 20
Hello ZeXx86,

first off all, many thanks to your support. Its getting clearer for me now. I have ordered the integration cable in your shop.
Do I have to create an Y-calbe to use Bluetooth and telemetry on the SYT Port for Red and Yellow cable?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .