It is currently Thu 28. Mar 2024 11:12:33

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sat 23. Mar 2019 20:49:41 
Offline

Joined: Sat 02. Mar 2019 13:28:05
Posts: 31
Hi,

My GeoLink is connected to Spirit System, the mobile app is connected to Spirit System and GeoLink and it looks OK.

I'm able to configure all parameters for GeoLink using mobile app, also it reads heading and level, the only thing that's strange is the following:
On the info tab, for Satellites info, it reads "n/a".

I am testing it standing in the room very near the window so I would somehow expect it to catch at least 1 satellite. However, as mentioned, it reads "n/a".

Do I have to enable something in setting in order to activate GPS on GeoLink?

Or something is malfunctioning?

Any help is appreciated, thanks!


Top
 Profile  
 
PostPosted: Sun 24. Mar 2019 11:23:27 
Offline

Joined: Mon 15. Oct 2018 4:19:55
Posts: 107
How about trying it outdoors ?


Top
 Profile  
 
PostPosted: Sun 24. Mar 2019 17:06:41 
Offline

Joined: Tue 24. Jul 2018 17:06:45
Posts: 25
Location: Nottingham uk
[quote="Denndb"]Hi,

My GeoLink is connected to Spirit System, the mobile app is connected to Spirit System and GeoLink and it looks OK.

I'm able to configure all parameters for GeoLink using mobile app, also it reads heading and level, the only thing that's strange is the following:
On the info tab, for Satellites info, it reads "n/a".

I am testing it standing in the room very near the window so I would somehow expect it to catch at least 1 satellite. However, as mentioned, it reads "n/a".

Do I have to enable something in setting in order to activate GPS on GeoLink?

Or something is malfunctioning?

Any help is appreciated, thanks![/qu

firstly dont bother mounting the geolink to boom as itll take you a lifetime to get it calibrated , i took mine of my mount all still connected and moved it round by hand youve only got the length of the geolink cable to move it around but its enogh , it took about 5 mins using this method ,so i started by pressing ,request calibration button , i then powered down and then re powered up . i then got the fast flashing blue leds to confirm the geolink was in calibration mode . i then moved the geolink in all directions until i got the steady blinking blue led to confirm the unit had found all the sats it required .


Top
 Profile  
 
PostPosted: Sun 24. Mar 2019 20:29:36 
Offline

Joined: Sat 02. Mar 2019 13:28:05
Posts: 31
Thanks a lot for your feedback. Today I have managed somehow to calibrate my GeoLink (it was attached to the boom), I was following the example given by the YT video. After I have calibrated - it started to see the sats and now everything is working (GPS lock works even in the room near the window)..


Top
 Profile  
 
PostPosted: Tue 26. Mar 2019 9:49:41 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Very well, thank you for the message!

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .