| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| 6 degree setting at 3 blade man rotor https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3218 |
Page 1 of 1 |
| Author: | scvflyer [ Mon 18. Mar 2019 22:16:13 ] |
| Post subject: | 6 degree setting at 3 blade man rotor |
Hello serviceteam, I was wondering if 6 degree setting must be done in the same way as described for 2 blade main rotor. and just to know - is it planned to extend Spirit systems in that way , that virtual swash plate can be configured by entering values? Would be helpfull for 3 blade rotors as well thanks and br siggi |
|
| Author: | ZeXx86 [ Tue 19. Mar 2019 11:16:53 ] |
| Post subject: | Re: 6 degree setting at 3 blade man rotor |
Hello, yes, it is very same as with 2 blades models. You have to put blade that will be used for the measurement parallel with the boom. You can already enter rotation angle value for the Virtual Swashplate rotation. But for the most todays helicopters this feature shouldn't be used. |
|
| Author: | scvflyer [ Wed 20. Mar 2019 11:15:32 ] |
| Post subject: | Re: 6 degree setting at 3 blade man rotor |
oki doki that's great and thanks br siggi |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|