It is currently Thu 28. Mar 2024 12:59:13

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 13. Mar 2019 1:03:32 
Offline

Joined: Sat 03. Feb 2018 16:53:40
Posts: 50
Good day all...
I'm trying to setup telemetry on my heli using as follows...

Spirit Pro
Kontronik Jive Pro 80HV
DX18
SPM 4649T
Telem Kontronik Cable
Jeti integration Cable.

According to the spirit manual/instructions,that's all I need but when it comes to the wiring,that's where I hit a snag.
The wiring says one part of the Kontronik Telem cable goes into SYS PORT the other single pin goes into ELE/AIL PORT.
The next step is Jeti integration cable,one part goes into the SPM4649T and the other into AIL/ELE PORT but this particular port is already taking by the Telem cable from the Kontronik unit.
I'm I doing something wrong or missed a step...?
I've gone over this several times but cant seem to figure it out.
Your help is appreciated.
Thanks.

Sent from my SM-N950W using Tapatalk


Top
 Profile  
 
PostPosted: Wed 13. Mar 2019 12:51:29 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

first you have written correctly that the Telem Kontronik cable should be connected at the SYS port.
But later you have written about ELE/PIT/AIL port which is wrong.

Jeti integration cable + SPM4649T will be connected at the RUD and ELE/PIT/AIL as described in the Spektrum integration guide:
http://manual.spirit-system.com/index.p ... ntegration

and Telem Kontronik cable will be connected as described in the Kontronik telemetry guide. So there is nothing to confuse, since both are using different ports.
http://manual.spirit-system.com/index.p ... _Telemetry

If you have Telem Kontronik V2 then this guide should be used:
http://manual.spirit-system.com/index.p ... _Telemetry

Hopefully it is clear now.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 13. Mar 2019 15:04:40 
Offline

Joined: Sat 03. Feb 2018 16:53:40
Posts: 50
Thanks for the reply...
But I do have the version one Kontronik Telem cable and after plugging one end into the system port on the spirit pro,I'm left with one single cable/pin and according to the picture below,that should go into the AIL/ELE port or that's not needed or maybe I bought the wrong cable ?
Thanks a lot.

Image

Sent from my SM-N950W using Tapatalk


Top
 Profile  
 
PostPosted: Thu 14. Mar 2019 8:37:20 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
There are two options how to solve the problem:

a) You can use a needle and remove the plastic and put the Telem Kontronik brown wire to the Jeti integration cable.
b) You can get second plastic part and modify the Jeti integration cable. We can send you such plastic housing.

In case of new Telem Kontronik V2 cable this problem will not occur as the cable is using different connector.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 14. Mar 2019 14:14:25 
Offline

Joined: Sat 03. Feb 2018 16:53:40
Posts: 50
ZeXx86 wrote:
There are two options how to solve the problem:

a) You can use a needle and remove the plastic and put the Telem Kontronik brown wire to the Jeti integration cable.
b) You can get second plastic part and modify the Jeti integration cable. We can send you such plastic housing.

In case of new Telem Kontronik V2 cable this problem will not occur as the cable is using different connector.

Perfect,I will modify the cable and in the future order the version 2 cable.
Thanks for your patience and help it's much appreciated.

Sent from my SM-N950W using Tapatalk


Top
 Profile  
 
PostPosted: Thu 14. Mar 2019 14:40:40 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
No problem, You are welcome!

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .