Spirit System
https://www.spirit-system.com/phpBB3/

Telemetry alerts about HW v4 and HoTT
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3093
Page 1 of 1

Author:  vlk [ Sun 13. Jan 2019 11:14:42 ]
Post subject:  Telemetry alerts about HW v4 and HoTT

Hello,
Can I receive and set telemetry warnings about HoTT when connecting a HW 130HV v4 to the Spirit Pro?
Or can I only see the values?
greeting
Siggi

Author:  ZeXx86 [ Mon 14. Jan 2019 17:44:18 ]
Post subject:  Re: Telemetry alerts about HW v4 and HoTT

Hello,

unfortunately this question should be forwarded to Graupner. They can help you with any particulars of the radio.

Author:  vlk [ Mon 14. Jan 2019 18:49:10 ]
Post subject:  Re: Telemetry alerts about HW v4 and HoTT

is it not possible in future to set thresholds via the software?
The alarm itself comes from the Graupner transmitter.
That's exactly how it works with JLog, UniLog2 or UniSens.
Only with the newer or larger Graupner transmitters one can set alarm thresholds even in the transmitter.

greeting
Siggi

Author:  TomasN [ Mon 14. Jan 2019 19:29:16 ]
Post subject:  Re: Telemetry alerts about HW v4 and HoTT

Yes, I also think that alarms are triggered (and also set) by sensors, e.g. Unisens-E, jLog and receiver (which also acts as sensor).

Transmitter can be used to set alarms threshold by telemetry menu for some sensors (Unisens-E, receiver). Alarms for jLog must be set in jLog setting PC software.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/