Spirit System
https://www.spirit-system.com/phpBB3/

Castle HV 80 does not run high
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=3071
Page 2 of 2

Author:  caravan-rau [ Thu 10. Jan 2019 16:58:35 ]
Post subject:  Re: Castle HV 80 does not run high

Hallo
Today I got your Telem CC cable
cable the same negative result
I have worked without resistance and now
the result is positive :)
The telemetry data is displayed irregularly. Alternately correct and incorrect
Is that normal? :?:

Author:  ZeXx86 [ Tue 15. Jan 2019 12:34:09 ]
Post subject:  Re: Castle HV 80 does not run high

Hello,

unfortunately this is not normal.
It should not work at all without the resistor.

Can you let me know which Castle ESC model is it exactly?

Author:  caravan-rau [ Thu 17. Jan 2019 19:21:36 ]
Post subject:  Re: Castle HV 80 does not run high

ICE2HV80 I installed

Attachments:
20190117_191242.jpg
20190117_191242.jpg [ 1.45 MiB | Viewed 157 times ]

Author:  ZeXx86 [ Thu 17. Jan 2019 20:10:16 ]
Post subject:  Re: Castle HV 80 does not run high

Oh, unfortunately this model is not supported officially.
If I am not wrong some people had success with it, but sadly there are few differences from Edge/Talon ESCs.

Please see this table:
http://manual.spirit-system.com/index.p ... ted_models

It is possible that with a different resistance values it could be fixed. I would try for example approx. 20 KOhm.

Author:  caravan-rau [ Sat 19. Jan 2019 8:28:01 ]
Post subject:  Re: Castle HV 80 does not run high

Thanks, I will try with 20 kohm

Author:  caravan-rau [ Tue 22. Jan 2019 21:35:50 ]
Post subject:  Re: Castle HV 80 does not run high

with a resistance of 20 kohm, the telemetry indicator is steady, but the regulator does not run stably
I have now installed the correct regulator and everything is good
problem solved
Thanks

Page 2 of 2 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/