It is currently Sun 24. Mar 2019 13:50:00

All times are UTC + 1 hour





Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 02. Jan 2019 10:11:03 
Offline

Joined: Mon 19. Nov 2018 18:01:25
Posts: 17
Happy New Year to all Spirit employees
I have a problem with telemetry configration: Castle HV 80, Spirit Pro, SPM4649T and DX9
I have all the settings as in the manual "Castle Telemetry" made. Including a 10 kOhm resistor installed.
The HV 80 initializes correctly, but the motor does not run high correct. When "engine off" he twitches and at "engine on" he runs at very low speed.
In tab Trottle Settings I worked with "min" and "max" without positive result. :(
If I reset all telemetry settings, the engine will run correctly.
Can you help me ?


Top
 Profile  
 
PostPosted: Wed 02. Jan 2019 10:22:46 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 8605
Hello and Happy New Year!

Is the cable with 10kOhms made by you or you are using the Telem CC cable?
Very likely the problem could be there. Maybe the cable is too long, if you used some longer extension.

If you are using Spirit Governor then you can try to turn it off. Also make sure the Throttle Frequency is just at 60Hz.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 02. Jan 2019 11:22:53 
Offline

Joined: Mon 19. Nov 2018 18:01:25
Posts: 17
The cable is made by me. 60 Hz is set. The cable is not extended. Spirit Governer is not used


Top
 Profile  
 
PostPosted: Wed 02. Jan 2019 11:26:10 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 8605
And what BEC voltage is configured? Can you try to decrease the voltage? If this will help then changing the resistor can help.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 02. Jan 2019 12:29:58 
Offline

Joined: Mon 19. Nov 2018 18:01:25
Posts: 17
BEC voltage is 5.9V
do I have to increase or decrease the resistance?


Top
 Profile  
 
PostPosted: Wed 02. Jan 2019 13:32:44 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 8605
Hmm, in this case all should work well.

Are you sure that the Link-Live feature is enabled, right?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 02. Jan 2019 18:41:25 
Offline

Joined: Mon 19. Nov 2018 18:01:25
Posts: 17
caravan-rau wrote:
The cable is made by me. 60 Hz is set. The cable is not extended. Spirit Governer is not used

"The cable is not extended " This statement is not correct . I had forgotten, it was about 15 cm extended.
the Link-Live feature is enabled


Top
 Profile  
 
PostPosted: Thu 03. Jan 2019 18:20:43 
Offline

Joined: Mon 19. Nov 2018 18:01:25
Posts: 17
I removed the resistor, now it works. Only the telemetry data is not always displayed. :shock:


Top
 Profile  
 
PostPosted: Fri 04. Jan 2019 8:02:13 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 8605
I am afraid but the resistor was maybe not connected properly.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 04. Jan 2019 13:37:52 
Offline

Joined: Mon 19. Nov 2018 18:01:25
Posts: 17
I will order your cable and then report


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 16 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .