It is currently Thu 28. Mar 2024 13:59:09

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Telem KONTRONIK v2 cable
PostPosted: Wed 12. Dec 2018 11:45:31 
Offline

Joined: Sat 12. Nov 2016 18:25:43
Posts: 5
Hello Tomas,

thanks for the update 2.6.0. :mrgreen:

You have written that you can convert the Kontronik V1 cable to V2 ....
Do you have some photos with the exact pin assignment of the plug?
and on which side in the Spirit pro then must be plugged?

best regards
spitz_1


Top
 Profile  
 
PostPosted: Wed 12. Dec 2018 11:50:46 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

yes, you need only the JST-Servo adapter.
This adapter must be modified so that it will not have RED wire connected.

Then you will plug the Telem KONTRONIK and JST-Servo together (there is just one possible way) and the JST connector will be connected at the satellite port. So everything else will be same as with Telem KONTRONIK v2 cable.

Single wire output from the Telem KONTRONIK is disconnected.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 12. Dec 2018 12:32:51 
Offline

Joined: Sat 12. Nov 2016 18:25:43
Posts: 5
Hello Tomas,

thanks for the quick response.
the brown cable what is the spirit pro in ELE / PIT / AIL from the telem cable, must also be spun out?

best regards
spitz_1


Top
 Profile  
 
PostPosted: Wed 12. Dec 2018 14:54:08 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
As I written in the previous post it should be disconnected. So it will be unused.

You are welcome!

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 12. Dec 2018 19:13:13 
Offline

Joined: Sat 12. Nov 2016 18:25:43
Posts: 5
Thank you Tomas,

I was not sure, my English is only a little basis and then the translated to ....

great thanks for all....

best regards
spitz_1


Top
 Profile  
 
PostPosted: Thu 13. Dec 2018 9:22:11 
Offline

Joined: Fri 26. Aug 2016 6:51:10
Posts: 218
Location: Austria
Hello Tomas!
Could you please tell me for the Telem KONTRONIK v2 cable, the assignment of the plugs on both sides. On the picture in the shop it is difficult to detect. Or you would have a picture where you can see it?
Greetings Gernot

_________________
Greetings from Gernot


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .