It is currently Fri 29. Mar 2024 7:50:00

All times are UTC + 1 hour





Post new topic Reply to topic  [ 69 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 7  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 01. Feb 2019 15:27:52 
Offline

Joined: Thu 06. Sep 2018 0:21:37
Posts: 71
It looks like it is the receivers wifh redundancy bus that are affected by this then. They might be running a slightly different firmware and that might be the reason I think.

Sent from my SM-G950F using Tapatalk


Top
 Profile  
 
PostPosted: Sat 02. Feb 2019 15:17:50 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Sadly we have still not received any reply from FrSky regarding this issue.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 02. Feb 2019 17:23:14 
Offline

Joined: Thu 06. Sep 2018 0:21:37
Posts: 71
Tomas, I will send them a message on RcGroups and I will link them here. I think they have an active representative on RcGroups.

Sent from my SM-G950F using Tapatalk


Top
 Profile  
 
PostPosted: Sun 03. Feb 2019 10:50:51 
Offline

Joined: Thu 06. Sep 2018 0:21:37
Posts: 71
Hi Tomas, a Frsky rep replied on RcGroups. He said they have noticed the problem and will give a reply as soon as possible https://www.rcgroups.com/forums/showthr ... st41081627

Sent from my SM-G950F using Tapatalk


Top
 Profile  
 
PostPosted: Mon 04. Feb 2019 8:35:14 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Thank you for the message.

We will urge the issue directly in FrSky once again.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 15. Feb 2019 10:10:25 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Today FrSky received our unit for testing and in no time they have managed to perform the tests.
And results - It is working perfectly with RX8R receiver and Taranis Q X7.
They have sent video from the testing and it just works.

They were using OpenTX 2.2.3. Next week they will be performing tests with X12s. Can you confirm that it does not work with this version for you?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 15. Feb 2019 11:02:57 
Offline

Joined: Tue 18. Dec 2018 15:55:06
Posts: 12
I will try it this evening or tomorrow morning with the receivers I have. I think I was running Open TX 2.2.3 when I tried it before, but will make sure. I'll also make sure I have the latest receiver firmware.
Using Horus X10.


Top
 Profile  
 
PostPosted: Fri 15. Feb 2019 11:06:47 
Offline

Joined: Thu 25. Oct 2018 12:05:29
Posts: 46
Hello Tomáš,

I have done a quick test using my 12x with OpenTx 2.2.3 and I cannot see any difference in behavior than before.
Lua scrips only work when starting them first and then power up the heli.

Regards,
Toni


Top
 Profile  
 
PostPosted: Fri 15. Feb 2019 11:11:46 
Offline

Joined: Thu 25. Oct 2018 12:05:29
Posts: 46
Addition:
When I start Lua first, Spirit LED keeps on blinking even if I escape the scrips screens.


Top
 Profile  
 
PostPosted: Fri 15. Feb 2019 11:52:06 
Offline

Joined: Thu 06. Sep 2018 0:21:37
Posts: 71
ZeXx86 wrote:
Today FrSky received our unit for testing and in no time they have managed to perform the tests.
And results - It is working perfectly with RX8R receiver and Taranis Q X7.
They have sent video from the testing and it just works.

They were using OpenTX 2.2.3. Next week they will be performing tests with X12s. Can you confirm that it does not work with this version for you?
Tomas, it only works if you start the lua script first then connect the integration cable then power on the FBL. If you, first, power on the FBL with the integration cable connected to the rx8r pro, the red LED on the Spirit Pro just keeps on blinking and when you start the lua on the Qx7s nothing loads on the lua script fields. The LED on the Spirit Pro will stay on blinking until you disconnect the integration cable.

I will make a video of the issue when I get home later today. For now I fly the heli with the integration cable disconnected as if you leave it connected, the LED on the Spirit Pro just continues blinking after you power the heli on. Even if you exit the lua script, the LED on the Spirit just keeps on blinking and continues to blink. The only way to stop it blinking is to power it off, disconnect the integration cable then power on with the integration cable disconnected.

Sent from my SM-G950F using Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 69 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 7  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .