It is currently Thu 28. Mar 2024 16:00:34

All times are UTC + 1 hour





Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2, 3  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 02. Nov 2018 13:39:03 
Offline

Joined: Fri 02. Nov 2018 11:42:49
Posts: 36
Where do I plug in my second spektrum satellite when I'm using geolink with the Spirit pro?


Top
 Profile  
 
PostPosted: Fri 02. Nov 2018 13:54:18 
Offline

Joined: Sat 03. Feb 2018 16:53:40
Posts: 50
peter- wrote:
Where do I plug in my second spektrum satellite when I'm using geolink with the Spirit pro?

You gonna have to buy the spektrum satelite adapter or spektrum multi adapter from the spirit E-shop and the manual/product page will tell you where to plug it in on the spirit pro.
You can use up to 3 sats on the pro if you are using geolink.
Hope this helps.

Sent from my SM-N950W using Tapatalk


Last edited by Rufus on Sat 03. Nov 2018 3:02:05, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri 02. Nov 2018 15:29:29 
Offline

Joined: Fri 02. Nov 2018 11:42:49
Posts: 36
Rufus wrote:
peter- wrote:
Where do I plug in my second spektrum satellite when I'm using geolink with the Spirit pro?

You gonna have to buy the spektrum satelite adapter or spektrum multi adapter from the spirit E-shop and the manul/product page will tell you where to plug it in on the spirit pro.
You can use up to 3 sats on the pro if you are using geolink.
Hope this helps.

Sent from my SM-N950W using Tapatalk


So this:
http://store.spirit-system.com/en/acces ... multi.html

or this:
http://store.spirit-system.com/en/acces ... er-v2.html

right?

I can't just change my jst plug on the satalite to a servo plug and then put it into the aux port?


Top
 Profile  
 
PostPosted: Fri 02. Nov 2018 16:58:26 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 273
no, the satellite works at 3,3V while on AUX (and the other connectors) you have the direct BEC voltage
5V or higher, depends on your BEC

the adapter contains the right hardware to lower the voltage to 3.3V


Last edited by urgno on Fri 02. Nov 2018 22:49:32, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri 02. Nov 2018 22:14:25 
Offline

Joined: Fri 02. Nov 2018 11:42:49
Posts: 36
Thanks..


Top
 Profile  
 
PostPosted: Tue 20. Nov 2018 10:23:01 
Offline

Joined: Fri 02. Nov 2018 11:42:49
Posts: 36
So I got the cable, but can’t get it working using the rud port.

The satellites don’t even light up when they are connected to the adapter cable. Should I set something up in the software or what?

Is it possible to use the adapter cable for the geolink instead? I tried that as well, but it doesn’t see nor power up the geolink..


Top
 Profile  
 
PostPosted: Tue 20. Nov 2018 11:48:11 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 273
have you connected it correctly ?

http://manual.spirit-system.com/index.p ... ti_Adapter


Top
 Profile  
 
PostPosted: Tue 20. Nov 2018 12:01:23 
Offline

Joined: Fri 02. Nov 2018 11:42:49
Posts: 36
I don’t have the multi adapter, just the single 1 sat adapter..

It does say though: Before usage please bind satellites that are intended to be connected to the adapter through primary and secondary ports.

Does this mean that I must connect my two satalites to the side ports when I bind, and then use the adapter in the rud port afterwards?

But what if I want to use 3 satalittes?

What port is the primary port?


Top
 Profile  
 
PostPosted: Tue 20. Nov 2018 15:38:12 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 273
peter- wrote:
I don’t have the multi adapter, just the single 1 sat adapter..
It does say though: Before usage please bind satellites that are intended to be connected to the adapter through primary and secondary ports.
Does this mean that I must connect my two satalites to the side ports when I bind, and then use the adapter in the rud port afterwards?

YES
peter- wrote:
But what if I want to use 3 satalittes?

then you need the multi adapter
>> Cable for connecting up to 3 Spektrum satellites with Spirit and up to 4 satellites with Spirit Pro unit.
of course if you use the geo-link, you subtract 1 from these numbers

peter- wrote:
What port is the primary port?

if you read throughly the manual, the info are all available :)

here you can see the geolink connected to secondary port of spirit pro
(the only unit that actually have primary and secondary satellite port)
the other port is the primary ;)
Image

here another pic that is very clear ( from the wiki manual )
Image


Top
 Profile  
 
PostPosted: Tue 20. Nov 2018 16:51:50 
Offline

Joined: Fri 02. Nov 2018 11:42:49
Posts: 36
Many thanks, I’ll try it in a couple of weeks. I just realized that one of my satalites seems to have broken although it bonds correctly and everything. When I remove my working satalites I can only control my elevator servo.

I also have a TM1000 telemetry unit that I will be using. Does anyone know if this can communicate with the spirit system in terms of data logging? As of right now I’m just powering it through my aux port.

Would be cool if I could use my rpm sensor as a gov as well...

Kind Regards,
Peter


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 23 posts ]  Go to page 1, 2, 3  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: atamargo and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .