It is currently Thu 28. Mar 2024 22:55:59

All times are UTC + 1 hour





Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 01. Nov 2018 11:33:10 
Offline

Joined: Thu 01. Nov 2018 11:26:02
Posts: 51
Hi,

I am new to Spirit FBL and looking for the configuration of RPM with Jive and Futaba T14SG Telemetry. I did not find anything how to set the correct gear and poles for RPM output. Can anybody help with this simple question? :-)

Regards,
Nils


Top
 Profile  
 
PostPosted: Fri 02. Nov 2018 16:36:32 
Offline

Joined: Thu 01. Nov 2018 11:26:02
Posts: 51
As nobody answers...is this functionality missing? :-) Or is the question too easy.


Top
 Profile  
 
PostPosted: Sat 03. Nov 2018 20:08:21 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

it is available at two places directly at the Telemetry Settings window and at the Throttle/Governor window in the Spirit Settings software.

So it is enough to just open Advanced tab/Telemetry and there you can set both parameters.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 03. Nov 2018 20:25:44 
Offline

Joined: Thu 01. Nov 2018 11:26:02
Posts: 51
Hi.

Actually I cannot use the setup software (see another post). Is it available in WLAN HTML as well? I set it there in the governor config (enabled it and disabled it then) but the RPM shown in telemetry is still not the correct one. More than a half below the expected values.

Cheers
Nils

PS. Installed the setup software on an old Windows XP PC and it seems that the unit stored the setting but RPM is still shown as round about 700.


Attachments:
04-11-_2018_14-13-05.jpg
04-11-_2018_14-13-05.jpg [ 286.61 KiB | Viewed 494 times ]
04-11-_2018_14-07-56.jpg
04-11-_2018_14-07-56.jpg [ 353.39 KiB | Viewed 494 times ]
Top
 Profile  
 
PostPosted: Mon 12. Nov 2018 21:54:38 
Offline

Joined: Thu 01. Nov 2018 11:26:02
Posts: 51
Could anybody using this setup help with this? Does Jive (old) and Futaba Telemetry work fine for most people?

Cheers,
Nils


Top
 Profile  
 
PostPosted: Thu 15. Nov 2018 9:23:44 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

your configuration seems to be correct.
But instead of calculating gear ratio from software you can check it directly at the model.

What is your model? You can simply divide main gear tooths / motor pinion tooths.
Which motor do you have?

Yes, you can set Gear Ratio in the Wifi-Link web interface too. With the latest firmware and software you do not have to enable Governor to set these values.
Instead it is available directly in the Advanced/Telemetry settings.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 15. Nov 2018 10:12:33 
Offline

Joined: Thu 01. Nov 2018 11:26:02
Posts: 51
Hi.

It is a Soxos 600 and a Pyro 30-14 with 10 pols. Soxos has a multiple stage gear so it has to be a step more. That’s because I am using the calculator for Soxos models also for another Soxos with leads to the correct ratio.

Cheers
Nils


Top
 Profile  
 
PostPosted: Sat 17. Nov 2018 22:49:49 
Offline

Joined: Thu 01. Nov 2018 11:26:02
Posts: 51
Hi,

To identify if the problem is related to the telemetry is the RPM of Jive ESC also shown in the Wlan interface in Governor settings or is this only for the external sensor? Then I will compare it next week when I am home.

Cheers,
Nils


Top
 Profile  
 
PostPosted: Sat 17. Nov 2018 22:56:21 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hi,

when you use External sensor than the Telemetry will display value from this sensor. So data from Jive ESC will be not used.
Same value will be displayed also in Wifi-Link interface and also Spirit Settings app.

The problem is that Jive could change some part in telemetry protocol and we can't find it, because their protocol is not open.

Is the RPM matching if you will set Gear Ratio to 2x less?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 19. Nov 2018 22:30:07 
Offline

Joined: Thu 01. Nov 2018 11:26:02
Posts: 51
Hi,

I checked this now and it does not reach the real rpm, it is quite too low.

Also I cannot find the gear settings in the Wlan HTML Interface. I attached two screenshots, as I understood it should be visible there...

Cheers,
Nils


Attachments:
19-11-_2018_22-11-53.jpg
19-11-_2018_22-11-53.jpg [ 43.8 KiB | Viewed 429 times ]
19-11-_2018_22-11-24.jpg
19-11-_2018_22-11-24.jpg [ 84.05 KiB | Viewed 429 times ]
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ]  Go to page 1, 2  Next

All times are UTC + 1 hour


Who is online

Users browsing this forum: EricDP and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .