This is how I set up my transmitter. Functions in RED will be available when more than 3 channels can be configured. I use 12 channels in total here.
BR Eugen
| Attachments: |
|
MZ-24 Belegung.jpg [ 371.09 KiB | Viewed 429 times ] |
| Spirit System https://www.spirit-system.com/phpBB3/ |
|
| Only 3 channels ( functions ) for GeoLink available ? https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2902 |
Page 1 of 1 |
| Author: | enied [ Mon 15. Oct 2018 4:26:26 ] |
| Post subject: | Only 3 channels ( functions ) for GeoLink available ? |
Dear all, This is basicly a feature request. I recently bought a Spirit Pro and a GeoLink from your company and I am still in the installation phase on my Align T-Rex 550X. I use it with a Graupner GR-24 and SUMD HD 12 and so far I am impressed about the quality of the hardware and the functions the firmware provides. Now, the Windows Desktop Software allows to use only 10 channels, where 7 of them are dedicated to Spirit Pro functionality. Even when you disable Gyro gain and set it up in the Banks, the Gyro gain channel will not be available for Geolink functions. This currently leaves 3 channels for GeoLink functionality, which is not enough in my point of view. GeoLink provides flight related functionality: Position Hold Altitude Hold Altitude Limit Return to Home Geo-Fence To be able to activate / disable these functions independently from any Banks, in total at least 12 channels would be needed where 5 of them must be able to be configured for GeoLink. The current Software implementation is not supporting this and so there are some restrictions as of now to fully use concurrently all the features of GeoLink. Are there any plans to develop the Desktop Software for full GeoLink support ? Please let me know. Thank you in advance. Best Regards, Eugen |
|
| Author: | ZeXx86 [ Mon 15. Oct 2018 7:22:22 ] |
| Post subject: | Re: Only 3 channels ( functions ) for GeoLink available ? |
Hello, yes, this is in plan. Although normally when pilot is flying he is usually using 1-2 features or can combine them. This is because pilot is unable to train muscle memory or sometimes even normal memory which switch is which if needed in hurry. So more channels are good when just playing but in real life it could be hard to imagine pilot searching 1 of 5 or more switches and trying which is which when model is close to impact. This could make it then way too complicated because people will forget about engaged features during flight and many will be surprised. So our main goal is to keep it simple as possible since more does not always mean better. But yes, there will be more channels available soon. |
|
| Author: | enied [ Mon 15. Oct 2018 7:25:38 ] |
| Post subject: | Re: Only 3 channels ( functions ) for GeoLink available ? |
Hi, thank you, this is great. Looking forward to the coming update. Best Regards, Eugen |
|
| Author: | enied [ Fri 26. Oct 2018 7:40:20 ] | ||
| Post subject: | Re: Only 3 channels ( functions ) for GeoLink available ? | ||
This is how I set up my transmitter. Functions in RED will be available when more than 3 channels can be configured. I use 12 channels in total here. BR Eugen
|
|||
| Author: | ZeXx86 [ Mon 29. Oct 2018 10:11:40 ] |
| Post subject: | Re: Only 3 channels ( functions ) for GeoLink available ? |
Thank you for the photo! |
|
| Author: | urgno [ Mon 29. Oct 2018 16:58:30 ] |
| Post subject: | Re: Only 3 channels ( functions ) for GeoLink available ? |
and then we need hands like this  
|
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|