It is currently Thu 28. Mar 2024 20:50:50

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 08. Oct 2018 10:18:18 
Offline

Joined: Mon 08. Oct 2018 9:42:07
Posts: 13
Hi,

I have a doubt concerning Geolink alignment procedure. There is the sentence in the manual:
Place GeoLink at a flat, aligned horizontal surface anywhere on your model in order to get a precise reference. (for example the Spirit unit).
What about models without horizontal surface (leaning forward like Oxy 4)? Can do the procedure on table instead of the model?

Can I do the procedure on a motor (magnets) or it is not possible?

Best regards
Piotr


Top
 Profile  
 
PostPosted: Mon 08. Oct 2018 14:39:02 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
Hi,

surface where the Spirit unit is mounted must be always horizontal (with respect to the model). It does not matter if model itself is leaned. This is just relative to the ground, but precise in regards to the model, main shaft, blades, boom.
No, a table is actually not good, because it has different inclination than the model.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 08. Oct 2018 15:41:00 
Offline

Joined: Mon 08. Oct 2018 9:42:07
Posts: 13
Thanks.
I wrote about a geolink, not a spirit unit.

The only surface I can make horizontal is top of the motor. Would it be OK?

Best regards
Piotr

Wysłane z mojego VTR-L29 przy użyciu Tapatalka


Top
 Profile  
 
PostPosted: Mon 08. Oct 2018 15:44:15 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12212
Yes, I replied in respect to GeoLink.
GeoLink require very same flat and horizontal surface as Spirit, but just at the boom.

Motor could be good, but there are better places on the model such as Gyro (Spirit) mounting position.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 08. Oct 2018 15:56:22 
Offline

Joined: Mon 08. Oct 2018 9:42:07
Posts: 13
There is no chance to put the geolink unit on the spirit unit. There is no enough space between the frame panels.

I will try with the top surface of the motor.

Thanks for your fast help.

Best regards
Piotr



Wysłane z mojego VTR-L29 przy użyciu Tapatalka


Top
 Profile  
 
PostPosted: Mon 08. Oct 2018 23:17:52 
Offline
User avatar

Joined: Tue 21. Aug 2018 13:05:23
Posts: 273
you could "extend" the inclination of the spirit using a small cilindrical object
so then you can "level" the geolink over that object that of course will have the same level as the spirit control unit


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .