It is currently Thu 28. Mar 2024 21:23:18

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 11. Sep 2018 19:53:06 
Offline

Joined: Thu 30. Aug 2018 5:15:29
Posts: 6
Today I have some trouble with my Geolink:
There are programmed only two options, RTH and Altitude Limit.
On the second flight Geolink lost the satellites, the blue LED flash very fast like it do during compass calibration. I turned the Heli around and around the LED flashs later
in the right way of calibration. I reconnect the power. Geolink find the satellites the LED doesn't flash anymore, the LED glows.
During the third fly, Geolink lost the satellites once again, no Altitude Limit and no RTH function is given.
Do you have any idea whats happend?

Greetings from Cologne, Dirk


Top
 Profile  
 
PostPosted: Wed 12. Sep 2018 10:41:13 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

I am afraid that this issue does not mean that satellites were lost.
Please check this:
http://manual.spirit-system.com/index.p ... t_blinking

I would like to ask you if you have a belt on the model?

Also you could try Clear all logs from the GeoLink in the Spirit Settings.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 12. Sep 2018 11:57:22 
Offline

Joined: Thu 30. Aug 2018 5:15:29
Posts: 6
Hello Tomas,

I can see 3 series of fast flashing blinks while powering up the GeoLink. Because of this I try to calibrate the compass function once more, but it doens't work. I've turned the heli for a while arround and arround nothing happens. Next problem: The spirit software didn't connect the geolink. I would try to start the compass calibration manual with a click of the button, no chance to connect.
Yes, my Heli have a belt..... Voodoo 600.
I can't clear all logs, no connection to geolink .

Dirk


Top
 Profile  
 
PostPosted: Thu 13. Sep 2018 20:18:55 
Offline

Joined: Thu 30. Aug 2018 5:15:29
Posts: 6
Hello Tomas,

Today in the morning I try to calibrate the compass once more. After many turns arround and arround the Geolink flashs suddenly in the right way.
In the afternoon I went outside to my flightground to test the Geolink functions. During a flight with the second accu, Geolink switch automatically
in the compass calibration mode. No RTH or Altitude Limit was possible. After a new compass calibration all functions work very well again.
I don't know what happens or why does it happen. Do you have an explanation?

Greetings from Cologne, Dirk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .