It is currently Sun 16. Dec 2018 21:40:56

All times are UTC + 1 hour





Post new topic Reply to topic  [ 1 post ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 27. Aug 2018 17:46:43 
Offline

Joined: Mon 30. Oct 2017 23:47:38
Posts: 45
Hi,

I have connected a Geolink on a 230S, i changed the ESC from the V1 to the 230S V2, blade did a upgrade on the ESC and now the tail is going great.

I did use the BEC testing feature and had the main motor running without blades and the tail motor was spinning on and off with the swash servos moving and that test passed. No problems and no power loss log messages. (I had some power loss messages earlier and found a defective cable).

I tried as well to have flights with geolink and no power messages in the log after the flight.

If they’re are no power loos messages on the uSpirit and it did not reset, can I assume the geolink has enough voltage and no brownouts?

I am have issues to calibrate the geolink and flight logs on geolink are not always created in the uSpirit. I have the latest 1.01 geolink FW and 2.5.1 spirit FW. It’s connected to à DSMX sat.


Envoyé de mon iPad en utilisant Tapatalk


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Google [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .