It is currently Fri 29. Mar 2024 11:19:56

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 16. Aug 2018 16:57:17 
Offline

Joined: Thu 18. Sep 2014 5:30:20
Posts: 2
Hello
II have an older Spirit unit running software version 2.4.0.
I have recently upgraded my transmitter from Spektrum DX8 to DX9, and am trying to redo the setups on the new TX.
Receiver is AR8000 with satellite at 11ms.
My issue is in the Spirit setup menu, the centres are pretty far off, Rudder shows -4%, Elev shows +4% and Aileron shows -4%.
I realize that the instructions specify not to input any subtrim in the TX, and that the program will automatically set that value, but is it actually resetting the above to 0?
Should I ignore the above deviations from center and set the servo range to 100% according to the program?
The reason I am concerned as well is I have already setup other helis on this transmitter with Spektrum AR7200 and V-Bar controllers, and both show 0 to 1% deviation from center, not the extremes as noted above..

Best Regards
K Shamash


Top
 Profile  
 
PostPosted: Thu 16. Aug 2018 17:31:42 
Offline

Joined: Thu 28. Aug 2014 17:01:01
Posts: 65
Sorry - possibly bad advice so I've removed it


Top
 Profile  
 
PostPosted: Fri 17. Aug 2018 13:55:52 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

these offsets could occur when some cable is not connected (for example Rudder channel). So at least aileron, elevator, rudder channels must be connected. But from your description it was all connected properly.
During initialization period there should be no stick movement.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 17. Aug 2018 17:35:07 
Offline

Joined: Mon 02. Oct 2017 22:35:03
Posts: 81
sbarro wrote:
Hello
II have an older Spirit unit running software version 2.4.0.
I have recently upgraded my transmitter from Spektrum DX8 to DX9, and am trying to redo the setups on the new TX.
Receiver is AR8000 with satellite at 11ms.
My issue is in the Spirit setup menu, the centres are pretty far off, Rudder shows -4%, Elev shows +4% and Aileron shows -4%.
I realize that the instructions specify not to input any subtrim in the TX, and that the program will automatically set that value, but is it actually resetting the above to 0?
Should I ignore the above deviations from center and set the servo range to 100% according to the program?
The reason I am concerned as well is I have already setup other helis on this transmitter with Spektrum AR7200 and V-Bar controllers, and both show 0 to 1% deviation from center, not the extremes as noted above..

Best Regards
K Shamash


If you are referring to the centers in the Diagnostics Tab
try doing the stick calibration on the DX9. You will
find it on the last page of the system setup menu.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .