Spirit System
https://www.spirit-system.com/phpBB3/

Geo-Link Mounting Align 470L
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2702
Page 1 of 1

Author:  Jeeprogue [ Thu 09. Aug 2018 1:16:06 ]
Post subject:  Geo-Link Mounting Align 470L

The manual specifies that the Geo-Link must be mounted perfectly horizontally, On models like the 470L that have a forward rake when sitting on the ground, the tail boom is not horizontal. It is however horizontal while flying, will this create any issues?

Author:  ZeXx86 [ Thu 09. Aug 2018 21:17:45 ]
Post subject:  Re: Geo-Link Mounting Align 470L

Unfortunately it is necessary to mount the GeoLink so that it is parallel with rotor blades or perpendicular to the main shaft.
It will affect RTH, Geo-fence and Position Hold.

You can find the exact angle with help of protractor in the GeoLink settings window.

Author:  dogbreath [ Fri 10. Aug 2018 17:17:36 ]
Post subject:  Re: Geo-Link Mounting Align 470L

The rake will not affect performance. Prop up the front skids to get the FBL level, then level the Geolink to the FBL during setup. As long as Geolink is "parallel" to FBL, it will fly correctly. Heli's with boom covers that aren't parallel to the FBL are more problematic and will require some shimming. Dan

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/