Spirit System
https://www.spirit-system.com/phpBB3/

Position and altitude hold
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2689
Page 1 of 1

Author:  alchemy66 [ Mon 06. Aug 2018 16:28:03 ]
Post subject:  Position and altitude hold

Is is ok and safe to take off and land with both Geolink options active?

Author:  alchemy66 [ Wed 08. Aug 2018 16:45:10 ]
Post subject:  Re: Position and altitude hold

Anyone? I know the manual says dont use any geolink function unless the model is airborne but I fly in coaxial mode as I'm still learning and it would be nice to be able to take off and land in coaxial like I usually do. Has anyone tried it?

Thanks.

Author:  ZeXx86 [ Wed 08. Aug 2018 16:56:47 ]
Post subject:  Re: Position and altitude hold

Yes, technically it is possible. But it is recommended to turn the features on after 10-20 seconds after GeoLink has steady ON status LED.
If sooner, then the model could try to move little bit off during lift off.

I recommend to try first Position Hold only. And trying to lift off and land, you should try the features in air first.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/