Spirit System
https://www.spirit-system.com/phpBB3/

Pitch servo does not work after initialization(Micro Spirit)
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2655
Page 2 of 2

Author:  ZeXx86 [ Wed 08. Aug 2018 10:45:53 ]
Post subject:  Re: Pitch servo does not work after initialization(Micro Spi

We have found that the unit contained tiny aluminium flake inside and it was laying on the pins of Gyro sensor.
This could cause a random and unexpected behavior including shorts during flight.

But otherwise the unit is perfect. Unfortunately we are extremely busy and there are vacations so we not sure what to do first.
To make sure that there is nothing else wrong we will just replace the electronics. But we were unable to replicate any wrong behavior with your unit.

Author:  Pino74 [ Wed 08. Aug 2018 14:18:54 ]
Post subject:  Re: Pitch servo does not work after initialization(Micro Spi

ok it's ok then, as soon as you come back from the holidays, you can update me on the change of the electronics.
Thanks

Author:  ZeXx86 [ Wed 08. Aug 2018 16:57:44 ]
Post subject:  Re: Pitch servo does not work after initialization(Micro Spi

Your unit was shipped today with replaced electronics.

We will contact you regarding the repair.

Author:  Pino74 [ Mon 20. Aug 2018 10:55:06 ]
Post subject:  Re: Pitch servo does not work after initialization(Micro Spi

Hi the Spirit micro unit, I received the day 14 Aug. All ok, but still have to try it anywhere thanks for everything and let me know if there are costs for your control

Many Thanks Pino

Page 2 of 2 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/