It is currently Wed 21. Nov 2018 2:37:36

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sun 08. Jul 2018 21:26:52 
Offline

Joined: Mon 20. Feb 2017 10:19:31
Posts: 19
Hi,

I have 4 spirits working and now I have an issue connecting to pc with one black spirit.
It won't recognize my spirit anymore. The com port is ok and shown in the software.
When I connect the unit the blue led from the USB turns off, don't know if this is normal.
The hott integration works fine. But I need to adjust the cyclic phase and this is not shown in hott integration.
So I need the PC. I don't know why I can't connect anymore to my pc. Any ideas? It is win7 with spirit settings 2.4.3

Greetings Andreas

Gesendet von meinem SM-G930F mit Tapatalk


Top
 Profile  
 
PostPosted: Sun 08. Jul 2018 22:39:05 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 8195
Hi,

this is because you have enabled HoTT integration. It is using same port as the USB interface.

You have to enter USB connection entry in the HoTT integration before it will work again.
Or you have to disable the integration or just dont plug the integration cable.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 09. Jul 2018 4:37:50 
Offline

Joined: Mon 20. Feb 2017 10:19:31
Posts: 19
Hi Tomas,

I'm not sure if I got you correct, but I had unplugged the cable between spirit and the hott receiver. I unplugged it at sys port and connected the sys port with USB...

I have joy y-cable at the sys port.

Greetings Andreas

Gesendet von meinem SM-G930F mit Tapatalk


Top
 Profile  
 
PostPosted: Mon 09. Jul 2018 7:24:08 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 8195
Hi,

if your model is powered and you will decide to connect with PC you can't access the unit unless you close the integration by "USB connection" entry in the integration menu.
Only then you can connect the integration. But you can't have both things connected at the same time even with Y-cable. You can connect always just one cable to the SYS port.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .