It is currently Sun 28. Apr 2024 7:24:33

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 06. Jul 2018 10:11:10 
Offline

Joined: Mon 16. Apr 2018 7:19:02
Posts: 192
Hello everyone,
Which you advise me, for complete servo kit for heli class 250-300 (Trex 250 and Oxy3 both), not expensive, but reliable, for the Spirit Micro?


i have old savox series Sh 0257, with brushed motor, are inaccurate and have play on the Fbl.
strangely they work well around 100 khz, if they fall to 50-60 Khz they become very inaccurate
I discovered it since I converted head from flybarred to flybarless, on my old trex 250.


I have to buy two sets(n.8) of servos and I would like to get them the same brand, for two Heli trex 250 and oxy 3, for Spirit Micro.

Thanks


Top
 Profile  
 
PostPosted: Fri 06. Jul 2018 11:02:08 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12235
Hello,

for Oxy 3 I recommend normal Spirit units if you have not bought the unit yet. Very likely for T-Rex it would be better choice too due to servo connectors on your servos.
But if you have uSpirit you will need 4x JST-Servo cables which will solve problem of different connectors.

To get the best performance I recommend at least MKS DS92A+ or DS93, DS95 for cyclic. DS93i, DS95i for tail. But these are rather expensive. But you can't find anything better.
If you want a cheap servos but still not bad performance, then for example Turnigy 306MG will work quite well.
Then there are some KST servos that are nearly same.

Yes, I highly do not recommend Savox 025X servos or anything similar with brushed motor.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 06. Jul 2018 11:12:32 
Offline

Joined: Mon 16. Apr 2018 7:19:02
Posts: 192
Perfect,,,then I start to see the prices of the servos and then choose. for the connectors, for me non problem,
I can calmly crimp a bit of everything, I have also been tuned for the JST ZH series as photos
I also prefer the micro on the oxy, I also have a spirit pro, but there I installed it on the trex 500.maybe I buy the normal spirit, not the pro.i am still undecided, what to mount on oxy 3.
Thanks for your help


Attachments:
Cattura.JPG
Cattura.JPG [ 36.23 KiB | Viewed 386 times ]
Top
 Profile  
 
PostPosted: Fri 06. Jul 2018 11:16:01 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12235
In that case it should be perfect :)

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 06. Jul 2018 11:20:18 
Offline

Joined: Mon 16. Apr 2018 7:19:02
Posts: 192
Thanks Again


are there any release dates on the GPS?

Thanks


Top
 Profile  
 
PostPosted: Fri 06. Jul 2018 11:23:14 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12235
Sorry. No release dates even if it would be tomorrow.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 06. Jul 2018 11:26:20 
Offline

Joined: Mon 16. Apr 2018 7:19:02
Posts: 192
ok i can understand,I believe and hope one day will be released

Thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 38 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .