It is currently Tue 19. Mar 2024 6:07:57

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 24. Apr 2018 18:01:10 
Offline

Joined: Tue 24. Apr 2018 17:51:48
Posts: 17
I just ordered my first Spirit Pro for my Nitro heli. I have a few questions.

1. Is Zeal mounting gel needed or recommended?
2. Should the mounting tape be cut into for 4 small squares or cover the entire bottom? I know with the Skookum they had you
use 4 small squares to limit vibration transfer.
2. Does the Specktrum backplate RPM sensor work?
3. Any good setup video's I should check out?
4. Any issues or tips I need to be aware of?

Thanks.


Top
 Profile  
 
PostPosted: Wed 25. Apr 2018 7:11:54 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12198
Hello,

thank you for your interest in our products!

1. No, gel is not recommended at all.We recommend to use our supplied double sided tape. The unit should hold firmly.
2. No, the unit comes with already cutted tapes exactly for the Spirit Pro.
3. It should work, but correct adjustment is needed (same for other units). I recommend to use normal TC curves first.
4. We are trying to describe everything in the manual/guides. So it depends on what you are interested specifically.
5. If using Governor, set only flat curves, also for idling. Then change the TC from e.g. 12% - 75% to get smooth spoolup.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 25. Apr 2018 18:44:14 
Offline

Joined: Tue 24. Apr 2018 17:51:48
Posts: 17
ZeXx86 wrote:
Hello,

thank you for your interest in our products!

1. No, gel is not recommended at all.We recommend to use our supplied double sided tape. The unit should hold firmly.
2. No, the unit comes with already cutted tapes exactly for the Spirit Pro.
3. It should work, but correct adjustment is needed (same for other units). I recommend to use normal TC curves first.
4. We are trying to describe everything in the manual/guides. So it depends on what you are interested specifically.
5. If using Governor, set only flat curves, also for idling. Then change the TC from e.g. 12% - 75% to get smooth spoolup.


Thank you for the reply. Just some clarification on point 5. I would typically use some trim on the throttle to get a good idle are you recommending that no trim be used and have a curve such as 0-10-50-50? I have attached some screen shots from my radio.


Attachments:
IMG_0200.jpg
IMG_0200.jpg [ 145.37 KiB | Viewed 292 times ]
IMG_0199.jpg
IMG_0199.jpg [ 144.83 KiB | Viewed 292 times ]
IMG_0198.jpg
IMG_0198.jpg [ 143.91 KiB | Viewed 292 times ]
Top
 Profile  
 
PostPosted: Thu 26. Apr 2018 7:51:59 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12198
Yes, you can use a trim for the throttle (especially for idling). But if you would set TC to somewhere near 50% it will reach at least 50% of the motor RPM which is quite high.
So a flat throttle curve near 10 - 12% + a trim should be better.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .