It is currently Thu 28. Mar 2024 12:54:29

All times are UTC + 1 hour





Post new topic Reply to topic  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 19. Apr 2018 16:47:32 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
Hello,

I've got my new μSpirit. And I think I made a mistake.
I used only pro version and I thought I can just plug the same way.

I plugged and immediately plugged off since there were no red light flashing.

I've check the resistance.
SYS / vcc to gnd , gnd to signal : 58MOhm , 60MOhm.
Power line / vcc tto gnd : 1950KOhm
My multimeter may not be accurate.

I tried powering up only through aux. No LED.

1) should I repair the unit?

I think I should PM you the rest of questions.

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
PostPosted: Thu 19. Apr 2018 22:29:56 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

you can power the unit in the very same way as Spirit Pro.
You only have to make sure you are using provided cables and/or our JST adapters.
Wires in the JST connectors are swapped, which is the biggest difference.

Can you describe your wiring please?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 20. Apr 2018 17:36:48 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
ZeXx86 wrote:
Hello,

you can power the unit in the very same way as Spirit Pro.
You only have to make sure you are using provided cables and/or our JST adapters.
Wires in the JST connectors are swapped, which is the biggest difference.

Can you describe your wiring please?


Well basically I used wrong adapter "JST micro to JR" which is (- to -, + to +, signal to signal)
When I am supposed to use included adapter type. which is " - to +, + to -, signal to signal"

Since I was using esc telem and Sub2, Rud and E/P/A +- port is all reversed including servo ports.


Attachment:
KakaoTalk_20180421_012050146.jpg
KakaoTalk_20180421_012050146.jpg [ 38.09 KiB | Viewed 558 times ]


Pro was , of course, working fine

Attachment:
KakaoTalk_20180421_012050519.jpg
KakaoTalk_20180421_012050519.jpg [ 53.38 KiB | Viewed 558 times ]

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
PostPosted: Sat 21. Apr 2018 8:49:06 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
I know, it was my bad.

Unless there is a method of reviving or reseting mcu I guess I have to send the unit.
Since there is no response toward voltage input.

There seems to be no shortage, though.

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
PostPosted: Sat 21. Apr 2018 11:36:32 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Thank you for the details.

Please check this page:
http://manual.spirit-system.com/index.p ... E.BCSpirit
There you can find how the pins are designed.

If your cables are now connected correctly (just + and - is needed in any powering connector - e.g. AUX or RUD), then it is really bad.
In that case you will have to ship the unit to us. For sure we can repair it (usually in one day) so it will work as a new one.

During power up, can you see at least any Status LED activity?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sat 21. Apr 2018 15:22:02 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
ZeXx86 wrote:
During power up, can you see at least any Status LED activity?


I don't see any activity.

I will send it possibly via EMS.
( I have to write "For Repair" on the cover and declare the value less than 25 USD.
Say, 10 USD for it is broken. ;) correct? )

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
PostPosted: Sat 21. Apr 2018 15:32:07 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Yes, please. That would be perfect.

With normal postage it should be there within 14 days I guess.
With EMS probably 3-5 days.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 26. Apr 2018 12:13:14 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
ZeXx86 wrote:
Yes, please. That would be perfect.

With normal postage it should be there within 14 days I guess.
With EMS probably 3-5 days.
It is in Czech now. I guess you are going to get it by Friday if not taken by customs.

I wonder if I can replace it with pro version.

And hope I can receive it with the first batch of GPS module.

PM me your opinion, please.

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
PostPosted: Fri 27. Apr 2018 14:34:37 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Your uSpirit is fixed and working well again.
Now we will be testing it to make sure everything is perfect.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Mon 30. Apr 2018 11:15:09 
Offline

Joined: Mon 14. Sep 2015 15:44:06
Posts: 95
ZeXx86 wrote:
Your uSpirit is fixed and working well again.
Now we will be testing it to make sure everything is perfect.


Thank you for your great service.
I am proud that I own spirit FBL.

Please, check PM. And most probably I will do what you suggest to do.

_________________
"Flying makes me happy" -- Markus Chelios


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .