Spirit System
https://www.spirit-system.com/phpBB3/

Micro spirit and bluetooth
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2516
Page 1 of 1

Author:  Pking [ Thu 12. Apr 2018 22:12:09 ]
Post subject:  Micro spirit and bluetooth

Hi,
Can i connect and use the Bluetooth module with the micro spirit ?

Author:  ZeXx86 [ Thu 12. Apr 2018 22:20:52 ]
Post subject:  Re: Micro spirit and bluetooth

Hi,

yes, you can use any peripheral that is compatible with Spirit units.
You might need just adapters (up to 2x JST-Servo). If you have receiver with a free servo port, you can use this port for powering. And communication cable will be connected by the JST-Servo provided for the USB interface.

Author:  Pking [ Thu 12. Apr 2018 22:29:39 ]
Post subject:  Re: Micro spirit and bluetooth

Thanks you are very fast to answer.

I am setting up for a 230S, I read on a post about confit for a tail motor but can’t find the parameters and what I have to do in this situation.

In the software they’re is the 230S preset but not sure what has to change.

Author:  ZeXx86 [ Fri 13. Apr 2018 13:42:06 ]
Post subject:  Re: Micro spirit and bluetooth

Hello,

you should configure everything that is in the Setup wizard to make it work correctly.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/