It is currently Thu 28. Mar 2024 16:12:24

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 06. Mar 2018 20:17:02 
Offline

Joined: Tue 17. May 2016 9:19:20
Posts: 56
Been away for a short while anyways on my 500 align heli when I plug the batt in it goes nuts for a couple of seconds and then stops...then initializes like normal.
I have recently replaced like for like servo..... any ideas?
Cheers, Chris.


Last edited by keeny on Tue 13. Mar 2018 19:54:33, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue 06. Mar 2018 20:37:58 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

it look like some BEC related issue.
Could you disconnect all servos (and anything that is not necessary) and try it again?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 07. Mar 2018 16:00:04 
Offline

Joined: Tue 17. May 2016 9:19:20
Posts: 56
Thanks for the reply. I disconnected all the servos then plugged in one at a time which resulted in an initial short movement then the up and down bit, the last servo which is a new replacement dipped down when the others went up when first plugging in the battery. then when I do bailout in quick succession it bounces very quickly at each limit up and down. could this be a problem with the new servo or have I missed some setting.
I didn't change any settings as the servo is an exact replacement and even centres in the exact same place.
Cheers, Chris.
ps, all the movements and bailout are going the correct way.


Top
 Profile  
 
PostPosted: Wed 07. Mar 2018 22:47:12 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Unfortunately it look like a servo issue. This should really not happen at any moment.
I guess that it is causing a short during these events and probably BEC is restarting as safety protection.

The only servos we have experience that were doing a very similar things were from BK.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Tue 13. Mar 2018 19:53:23 
Offline

Joined: Tue 17. May 2016 9:19:20
Posts: 56
Finally got around to stripping new align servo down and there was a grumpy gear in there that you couldn't really feel when assembled.
Changed the gear and all is well.


Top
 Profile  
 
PostPosted: Wed 14. Mar 2018 10:29:54 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Thank you for great message!

Good to know it is working well now.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: atamargo and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .