It is currently Fri 22. Jun 2018 23:49:11

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Spektrum Intregation
PostPosted: Mon 19. Feb 2018 1:46:03 
Offline

Joined: Mon 02. Oct 2017 22:35:03
Posts: 17
I'm trying to enter the Integration Menu on a DX9 and can't get the READY notification.
Holding the Rudder stick to the right and Aileron stick to the left for 2 seconds as instructed.
I have upgraded Spirit firmware to 2.4.4 and the boot loader. In the DX9 i have tried firmware 1.20 and now 1.21 with no luck. I have Telemetry working so this is a little confusing as why Integration is not. Any help would be appreciated.


Top
 Profile  
 
 Post subject: Re: Spektrum Intregation
PostPosted: Mon 19. Feb 2018 8:11:24 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 7548
Hello,

the problem could be caused, if the basic configuration is somehow not proper.
The most probable thing is that channels are not reversed in the way they should be (in your radio).
Please take a look at the Diagnostic tab. Then move with the sticks and observe their direction. Is the direction matching with the real movement?

Another possíbility is, that safety lock is activated, because Throttle is above ~10%. Then the integration is turned off to not cause any potential issue during flight if it was left opened.
So it might be enough to activate throttle hold.

You have mentioned telemetry is working, is it working also with Spirit unit so that you can see any variable from there? If yes, then the problem will be in some of two mentioned things above.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Spektrum Intregation
PostPosted: Mon 19. Feb 2018 14:11:12 
Offline

Joined: Mon 02. Oct 2017 22:35:03
Posts: 17
In the diagnostic page all stick movements are correct and throttle shows -11%.
I get ESC telemetry data on the ESC page pack voltage FET temp etc. In the manual it states use roller to get to a blank page I forgot to mention I can not get a blank page. Is this the problem ?
Also are the sticks supposed to go to the corners when entering the Integration ?


Top
 Profile  
 
 Post subject: Re: Spektrum Intregation
PostPosted: Mon 19. Feb 2018 14:17:58 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 7548
Yes, blank page is absolutely necessary.
There you actually should see the integration menu.

You have to enable this screen in the radio/Telemetry menu - see the integration guide.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Spektrum Intregation
PostPosted: Mon 19. Feb 2018 15:34:32 
Offline

Joined: Mon 02. Oct 2017 22:35:03
Posts: 17
Got it missed the part about activating TEXT GEN.

Thanks Tomas


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .