Spirit System
https://www.spirit-system.com/phpBB3/

SPirit pro setup
https://www.spirit-system.com/phpBB3/viewtopic.php?f=20&t=2421
Page 1 of 1

Author:  flyingdockp [ Fri 09. Feb 2018 12:03:17 ]
Post subject:  SPirit pro setup

Hello,

I want to use a spirit pro in a turbine helicopter, 3 blade (1.80m diameter) rotorhead, with a 4 point swashplate with a FRSKY receiver connected via SBUS (yes, this time with an ordinary cable :D ).
Only thing is... the swashplate is rotated 45 degrees.

How do I get this setup up correct in the Spirit Pro setup? Suggestions for initial setup?

Thanks

Author:  ZeXx86 [ Fri 09. Feb 2018 13:24:36 ]
Post subject:  Re: SPirit pro setup

You will have to use the CCPM 90 Velos swashplate type. Then set Advanced/Expert settings/Phase angle to 45° and it should work.

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/