It is currently Thu 28. Mar 2024 13:55:21

All times are UTC + 1 hour





Post new topic Reply to topic  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Sat 09. Dec 2017 1:59:31 
Offline

Joined: Sat 09. Dec 2017 1:50:00
Posts: 5
A newbie here with a very newbie question. I am trying to set up a micro spirit system with a FrSky Taranis and a Align Trex 250 Pro Dfc. I cant figure out what channel should be mixed with the throttle. Is it the pitch or the elevator? I can make both work depending on my Tx settings and servo reversals, but I don't know which way is correct. The transmitter is a mode 2. Thanks in advanced.


Top
 Profile  
 
 Post subject: Re: Micro Spirit Setup
PostPosted: Sat 09. Dec 2017 2:46:04 
Offline

Joined: Sat 09. Dec 2017 1:50:00
Posts: 5
What I am trying to determine is, what channel controls the collective? Pitch or elevator?


Top
 Profile  
 
 Post subject: Re: Micro Spirit Setup
PostPosted: Sat 09. Dec 2017 14:46:03 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hello,

I recommend to not mix anything - so that all is independent - in this way more advanced pilots are flying. It will give you also better behavior of the helicopter.

I am not sure if I understand your question, but collective pitch is always pitch channel.
Elevator is axis which is responsible for tilting the model forward and backward.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Micro Spirit Setup
PostPosted: Sat 09. Dec 2017 15:23:45 
Offline

Joined: Sat 09. Dec 2017 1:50:00
Posts: 5
Thanks for the reply. I am can't determine if the pitch channel should be dedicated to the pitch servo or the collective(left stick). On the channel mapping screen there are more options to the right. Is this where the collective pitch channel should be assigned? Or is it the pitch channel on the left. The instructions on the wiki aren't very clear on this.


Top
 Profile  
 
 Post subject: Re: Micro Spirit Setup
PostPosted: Sat 09. Dec 2017 15:29:33 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
You can just download our Taranis profile and you are ready to fly.
It is available here:
http://manual.spirit-system.com/index.p ... ntegration

All channels should move separately in the radio.
Then you have to see the same behavior also in the Spirit Settings (Diagnostic tab).

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Micro Spirit Setup
PostPosted: Sat 09. Dec 2017 16:39:44 
Offline

Joined: Sat 09. Dec 2017 1:50:00
Posts: 5
Is a telemetry receiver required for this to work? Where on the sd card should the spirit file be placed? Under (scripts) or can it be placed anywhere? I have a micro spirit unit. Is integration cable necessary for this unit?


Top
 Profile  
 
 Post subject: Re: Micro Spirit Setup
PostPosted: Sat 09. Dec 2017 16:46:10 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Yes, integration cable and S.Port receiver is required to make the integration work. If it is not present, it will work as any other radio.

Scripts can be placed anywhere on the SDCard.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Micro Spirit Setup
PostPosted: Sat 09. Dec 2017 16:48:53 
Offline

Joined: Sat 09. Dec 2017 1:50:00
Posts: 5
Thanks


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .