It is currently Thu 28. Mar 2024 21:46:47

All times are UTC + 1 hour





Post new topic Reply to topic  [ 4 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Tue 05. Dec 2017 15:27:25 
Offline
User avatar

Joined: Thu 19. Jan 2017 2:17:34
Posts: 58
Location: Alberta, Canada
Can someone explain the procedure for using this parameter as I am using stabilization in the following bank set up.
Bank 0 = Self Level w/ Rescue
Bank 1 = Normal w/ Rescue
Bank 2 = Acro Level w/ Rescue

When I tried to set my rarte to 50% in Bank 1 it seemed the rescue when activated would not set the pitch in the Bank 0 or Bank 2, and it did not seem to change pitch in the other two banks. I could not change the rate in the other two banks so I just set Bank 0 back to the original 60% rate and then all banks showed rescue working as it did before in all banks when bench testing.

Any help would be appreciated, thank you.

Kevin

_________________
Blade 230 S / 230 S NF / 450X / 500X / 550X ~ Trex 470LM ~ OXY 3-285 / OXY 4-325 / OXY 4 MAX ~ Spektrum DX9 BE / DX6 Gen 2 ~ Spirit FBL
_______________________________________________
Team OXY Helicopter - Lynx Heli Innovations Field Rep


Top
 Profile  
 
PostPosted: Tue 05. Dec 2017 15:34:19 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
I am not sure if I understand your configuration.

But whatever is configuration, it is not possible to set Rescue and Stabilisation for the same Bank.
So it is not possible to set:
Quote:
Bank 0 = Self Level w/ Rescue
and rest.

It can be Stabilisation OR Rescue for single Bank.

Rescue Collective Pitch can be configured for any Bank where you have Rescue. Then once activated it will set the Collective Pitch at 50% or any other configured value.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 07. Dec 2017 3:42:11 
Offline
User avatar

Joined: Thu 19. Jan 2017 2:17:34
Posts: 58
Location: Alberta, Canada
Hello Tomas,

I apologize for the wrong bank switch information in my above post, it should of read:

Bank 0 = Self-Level / Stabilization
Bank 1 = Normal / Rescue
Bank 2 = Acro-Level / Stabilization

With help from a friend I was lead to the realization that the Rate (%) of Rescue Collective Pitch can only be set in Bank 1 in my set up as it works for the bank containing Rescue function and that you must set the Bank tab in the bottom RH corner of the software tab to the Bank 1 in my case to change the pitch % for bailout. This also changes the bailout rate or % of pitch in the other two banks as well when the rescue / bailout switch is activated which was proven with a bench test. Again sorry for the poor information presented in the initial posting of this thread.

Have a nice day & best regards,

Kevin

_________________
Blade 230 S / 230 S NF / 450X / 500X / 550X ~ Trex 470LM ~ OXY 3-285 / OXY 4-325 / OXY 4 MAX ~ Spektrum DX9 BE / DX6 Gen 2 ~ Spirit FBL
_______________________________________________
Team OXY Helicopter - Lynx Heli Innovations Field Rep


Top
 Profile  
 
PostPosted: Thu 07. Dec 2017 8:23:54 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

that is great!

No problem, I am glad that all is OK.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .