It is currently Thu 28. Mar 2024 17:12:54

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Wed 18. Oct 2017 14:28:23 
Offline

Joined: Tue 03. Oct 2017 12:14:24
Posts: 49
I build up a new TRex 550 X and want to use it with a Spirit Pro.
In Startposition the TRex 550X is tilted for 5 degrees below because the landing skid is in the front shorter than in the rear.

I think now, if I make initialization with that forward angle, Stabilisation Funktion will not work properly and will the heli stabilize also to this Forward angle.
My question is now, , wether I have I to bring the heli at initialization in an exact horizontal Position, to stabilize it in a straight and stable attitude.

(Probably it is a stupid question, but I feel insecure)

Thanks for all answers.

Roland


Top
 Profile  
 
PostPosted: Wed 18. Oct 2017 14:41:26 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hi,

slight inclination is not a problem at all. There are many helicopters with similar construction.
The stabilisation and rescue is learning all the time even during flight right after take off.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 18. Oct 2017 15:04:23 
Offline

Joined: Tue 03. Oct 2017 12:14:24
Posts: 49
Hello Tomas,

thank You for the quick answer.

Roland


Top
 Profile  
 
PostPosted: Wed 18. Oct 2017 15:33:03 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
You are welcome.

If angle is less than 30° then there shouldn't be any problem.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 26. Oct 2017 14:18:22 
Offline

Joined: Tue 03. Oct 2017 12:14:24
Posts: 49
Just another (hopefully last) question to this theme:

Shall I make the FBL Setup and Zero Pitchung with the landing skid on or shall I remove the landing skid to make sure, the heli stands really horizontal?

Roland


Top
 Profile  
 
PostPosted: Thu 26. Oct 2017 19:48:14 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Landing gear or position of the model does not matter at all during setup.
It has no effect on the settings, it is just important to set everything always with mounting position and/or main shaft. Never measure (anything) with respect to ground.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .