It is currently Thu 28. Mar 2024 21:18:38

All times are UTC + 1 hour





Post new topic Reply to topic  [ 7 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Thu 28. Sep 2017 20:07:30 
Offline

Joined: Wed 06. Sep 2017 18:09:18
Posts: 19
Hello There,

Everything is connected as per the manual, and I've re-flashed the unit to stop the "always in binding mode" issue. The FBL satellites and the SPM4649T are all bound correctly it seems!

Issue 1 --- Can't Access Integration

When I scroll to the right after turning on the transmitter, there is No blank screen :|

Issue 2 --- No Telemetry Data

I've selected the Kontronik Jive Pro option in the software.

I can scroll through the various DX9 telemetry screens, but no data is displayed :|

Edit: My DX9 has been successfully updated to have the latest Firmware and AIRWARE.


Please can someone provide any suggestions they can think of?

Cheers, Gary.


Last edited by GaryDT on Thu 28. Sep 2017 20:13:47, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu 28. Sep 2017 20:12:36 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

in the Telemetry settings of your transmitter you can go to the Text Gen and edit options to show at the Roller.
This should give you the Blank screen.

After this the integration should work. If not, then it is answer for the second issue.

Do you see the Telemetry signal in the left corner?

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 28. Sep 2017 20:24:57 
Offline

Joined: Wed 06. Sep 2017 18:09:18
Posts: 19
In the top left corner there is a series of vertical lines. Is this the Telemetry signal you mentioned?

I'm not sure what "Text Gen and edit options to show at the Roller" means though. I've enabled various Telemetry features in the Tx but all the data shows dashed i.e. ---- so no data values.

The Tx Telemetry main screen has two initial menu options, "Settings" and "File Settings". Within the "Settings" one of the menu options is "Display" currently set to: Roller.

Anyway I'll have a play to see if anything changes :)


Top
 Profile  
 
PostPosted: Thu 28. Sep 2017 20:29:10 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Yes, this is the signal.

Did you performed transmitter preparation step?:
http://manual.spirit-system.com/index.p ... reparation

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Thu 28. Sep 2017 20:37:32 
Offline

Joined: Wed 06. Sep 2017 18:09:18
Posts: 19
I have now :D

So the integration works now :)

I'm just checking the Telemetry. Back soon.


Top
 Profile  
 
PostPosted: Thu 28. Sep 2017 20:42:42 
Offline

Joined: Wed 06. Sep 2017 18:09:18
Posts: 19
Yes the Telemetry is showing values now.

Sorry, it was my fault for missing out the transmitter preparation step :oops:

Thanks again :roll:


Top
 Profile  
 
PostPosted: Thu 28. Sep 2017 20:46:36 
Online
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Good job :)

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: webinas, ZeXx86 and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .