It is currently Thu 28. Mar 2024 11:43:08

All times are UTC + 1 hour





Post new topic Reply to topic  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Bank switching
PostPosted: Sat 09. Sep 2017 17:04:38 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 107
Location: Germany
Hi,

using telemetry I am getting in trouble with the amount of channels.

My setup is a scale heli with Futaba TX.

Before I used a Frsky TFR8SB and had the S.BUS plus 8 channels.
Channel 8 was used for the lights. Bankswitching was done via channel 7.
Now, with a Futaba R7008SB I lost channel 8, because I need this port as my S.BUS-port, the S.BUS2 is used for telemetry.
To be able to switch the lights, I now use channel 7, because port 8 is used for S.BUS. Bankswitching is only capable up to channel 7.

Any ideas how I could solve this problem without falling back to using channel 5 and configuring gyro value in the spirit?

Thanks in advance,
Alexander


Top
 Profile  
 
 Post subject: Re: Bank switching
PostPosted: Sat 09. Sep 2017 17:33:45 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hi,

you can check Futaba Telemetry guide and use just S-Bus2 for both connection and telemetry.
So channel 8 will be free.

Alternatively you can change receiver mode to map another set of channels - see receiver manual.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Bank switching
PostPosted: Sun 10. Sep 2017 11:44:38 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 107
Location: Germany
Hi,

thank you!
Sometimes you do not to see the wood for the trees... ;)

So I changed the receiver mode to map channels 9-15 plus S.BUS. Works as expected.

Regarding your other suggestion, as far as I understand, there should be a separate bus for connection and one for telemetry.
That I would mean I need 2 S.BUS2 ports, but the R7008SB offers 1 fixed S.BUS2 port and one S.BUS on port 8 depending of the mode it is set to.
I could not find any more information...

Best regards,
Alexander


Top
 Profile  
 
 Post subject: Re: Bank switching
PostPosted: Sun 10. Sep 2017 11:51:19 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hi,

you are welcome!

Here you can find all necessary info:
http://manual.spirit-system.com/index.p ... _Telemetry

Only one connection is needed even for Futaba telemetry (SBUS2). The only problem there is powering the receiver. Power for receiver and unit must be shared by another cable. But this cable can be connected anywhere in the receiver.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Bank switching
PostPosted: Sun 10. Sep 2017 12:23:53 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 107
Location: Germany
Hi,

yes I have seen this, but thought this is for ESCs connected to the Spirit. Can I use this for external sensors, such as Futaba F1678 as well? That would mean I have to connect it the Spirit with the RX and the sensor via a hub or Y-cable?

Best regards,
Alexander


Top
 Profile  
 
 Post subject: Re: Bank switching
PostPosted: Mon 11. Sep 2017 19:51:49 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hi,

yes, you can do so with hub.
Unfortunately I can't be sure about compatibility. But if there will be any problem, we will solve it.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Bank switching
PostPosted: Mon 11. Sep 2017 20:56:49 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 107
Location: Germany
Hi,

OK, great!
I'll give it a try next weekend.

Best regrads,
Alexander


Top
 Profile  
 
PostPosted: Tue 12. Sep 2017 20:09:22 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 107
Location: Germany
Hi,

I could nor wait until the weekend... ;)

I tried connecting the Spirit, a Futaba sensor F1678 and a R7008SB to a common S.Bus2.
The connection cable from the S.Bus2 is done with the FrSky-Cable with the needed modification.

If all the 3 devices are connected to a bus, I do not see any values from the F1678, but the connection between the Spirit and the RX works as expected.
As soon as I disconnect the FrSky cable from the bus, I can of course not control the heli, but I immediately get the values form the F1678.

So I am sorry to say it does not work this way...

Best regards,
Alexander


Top
 Profile  
 
 Post subject: Re: Bank switching
PostPosted: Thu 14. Sep 2017 22:13:27 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hi,

thank you for the report.
We will find solution for you.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Bank switching
PostPosted: Fri 15. Sep 2017 20:15:19 
Offline

Joined: Mon 08. Dec 2014 20:37:45
Posts: 107
Location: Germany
Hi,

thank you in advance!
If you want me to check some more, please let me know.

Best regards,
Alexander


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .