It is currently Thu 28. Mar 2024 12:39:29

All times are UTC + 1 hour





Post new topic Reply to topic  [ 6 posts ] 
  Print view Previous topic | Next topic 
Author Message
 Post subject: Stabi function channel
PostPosted: Fri 18. Aug 2017 18:33:18 
Offline

Joined: Mon 10. Oct 2016 0:45:02
Posts: 100
I have banks assigned as such 0 = normal rescue, 1= normal stabi, 2= acro stabi.
Using channel 8 assigned to Stabi Function.
In the diagnostic screen I see when I activate channel 8 I see the gyro switch from head lock to head lock rescue. This works fine from any of the 3 banks. But if I'm in bank 1 or 2 I don't see the Stabi function on the gyro channel. Is this correct or do I still need to program another mix so it shows this. I don't want to use Neg gyro gain I want to assign Pos gain to all three I.U. s.


Top
 Profile  
 
PostPosted: Fri 18. Aug 2017 18:45:51 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
When software is connected, your radio will not change banks. Banks can be changed only by combo box in the software.
So please make sure that you are in the right bank when trying it.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 18. Aug 2017 19:27:23 
Offline

Joined: Mon 10. Oct 2016 0:45:02
Posts: 100
So in order to see if Bank 1 or 2 is assigned correctly on the Diagnostic page I need to change it
in the Active Bank box at the bottom. It should then tell me Headlock Stabi. on the gyro channel. Correct ?


Top
 Profile  
 
PostPosted: Fri 18. Aug 2017 19:36:01 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Yes, exactly.

Or you can close the software and try to observe behavior of the swashplate.
But this is not as easy.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 18. Aug 2017 19:51:57 
Offline

Joined: Mon 10. Oct 2016 0:45:02
Posts: 100
OK thanks


Top
 Profile  
 
PostPosted: Fri 18. Aug 2017 23:08:29 
Offline

Joined: Mon 10. Oct 2016 0:45:02
Posts: 100
If I understand the manual correctly if you use the Stabi Function in channel assignment then you can't use the Neg Gyro Gain method. So you can't use a combination of both ?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .