Spirit System • View topic

It is currently Tue 16. Apr 2024 14:38:37

View unanswered posts | View active topics

Board index » English » HELI » Support

All times are UTC + 1 hour

Update 2.4.2

Page 1 of 2

[ 18 posts ]

Go to page 1, 2 Next

Print view

Previous topic | Next topic

Author

Message

gerry

Post subject: Update 2.4.2

Posted: Thu 06. Jul 2017 15:47:27

Joined: Fri 26. Aug 2016 6:51:10
Posts: 218
Location: Austria

Hello tomas in the new description of the Uodate 2.4 is. Is supported by Spirit Aero. What does that mean now exactly.Can the Aero software now be adjusted by Jeti transmitter? Liebe Grüße Gernot

_________________
Greetings from Gernot

Top

ZeXx86

Post subject: Re: Update 2.4.2

Posted: Thu 06. Jul 2017 16:32:18

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12225

Hello,

where you can see this message?
It was related to version 2.4.0, while the current one is 2.4.2.

But regarding Jeti and Aero nothing changed - you have to ask Jeti as the problem is just there.

_________________
Spirit System developer

Top

gerry

Post subject: Re: Update 2.4.2

Posted: Thu 06. Jul 2017 18:07:43

Joined: Fri 26. Aug 2016 6:51:10
Posts: 218
Location: Austria

Support for μSpirit unit:
Full support of the micro Spirit.
Compatible with all peripherals.
Can be used on helicopters of 130 - 250 size.
Support for ESC/Motor driven rudder.
New parameter Rudder - Control type to allow selection of the rudder drive.
NOTE: Will be supported by Spirit Aero firmware.
IMPORTANT: Older firmwares are not supported

_________________
Greetings from Gernot

Top

ZeXx86

Post subject: Re: Update 2.4.2

Posted: Thu 06. Jul 2017 18:51:14

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12225

Yes, this mean that μSpirit will be supported by Spirit Aero and you can fly with aircrafts also with this unit.

_________________
Spirit System developer

Top

Nafets77

Post subject: Re: Update 2.4.2

Posted: Fri 07. Jul 2017 21:39:49

Joined: Thu 25. Jun 2015 21:38:40
Posts: 11

Will we have higher rpm available for the governor on a future release?

Keep up the good work

Top

ZeXx86

Post subject: Re: Update 2.4.2

Posted: Fri 07. Jul 2017 22:01:33

Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12225

Yes.

Thank you!

_________________
Spirit System developer

Top

derailleur

Post subject: Re: Update 2.4.2

Posted: Sun 23. Jul 2017 9:53:37

Joined: Fri 06. Mar 2015 18:33:53
Posts: 26

I have problem, I update a 2.0.1 firmware to 2.4.2 (with mac)...All is ok but the spirit is not recognize when I plug it on my mac. Only demo mode :evil:

Top

Coco66

Post subject: Re: Update 2.4.2

Posted: Sun 23. Jul 2017 12:47:42

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy

Try installing again the Mac software and the drivers.

_________________
Oxy 2 ♦ X-Vert ♦ Warp 360 ♦ Blade 450X ♦ Blade 450X Nightflyer ♦ Goblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQX ♦ LadyMQX ♦ nano QX ♦ nano QX FPV ♦ Inductrix ♦ DX8 G1

Top

derailleur

Post subject: Re: Update 2.4.2

Posted: Sun 23. Jul 2017 14:12:25

Joined: Fri 06. Mar 2015 18:33:53
Posts: 26

I have 7 spirit ...On my oxy(s), updated before ( they was in 2.4.1 version) all is ok for the 2.4.2...juste 2 helis that was in 2.0.1, the spirit is not recognize after flashing in 2.4.2 version...
So I think it's ok for he software. I have also a Windows PC and it's the same that the mac. No recognize...

Top

Coco66

Post subject: Re: Update 2.4.2

Posted: Sun 23. Jul 2017 14:32:21

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy

But they still work properly?

Top

Page 1 of 2

[ 18 posts ]

Go to page 1, 2 Next

Board index » English » HELI » Support

All times are UTC + 1 hour

Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: