It is currently Fri 29. Mar 2024 7:04:11

All times are UTC + 1 hour





Post new topic Reply to topic  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 14. Jul 2017 19:02:23 
Offline

Joined: Tue 17. Jan 2017 10:48:15
Posts: 31
Hello Tomas,

in the menu item "Servo Assignment" of my transmitter (JETI DS-16) I have adjusted the following channel mapping:

1. Throttle
2. Aileron
3. Elevator
4. Pitch
5. Rudder
6. Gyro sens.
7. Bank (if used)
8. Stabi (if used)

This mapping originates from the manual: http://manual.spirit-system.com/index.p ... ntegration

Can you cut the Gordian knot: In the diagnostic tab of the unit the functions are running only the right way, if I leave default channel mapping in the unit. It results in problems, if I adopt the channel mapping of the transmitter (in other words: if channel mapping in the unit is the same as in the transmitter). I have to use the following channel mapping in the unit in order to get a correct working unit:

1. Throttle
2. Aileron
3. Elevator
4. Rudder
5. Gyro Gain
6. Pitch

7. Bank
8. F: Stabi Function

As you can see, channel 4, 5 and 6 are mismatching with the transmitter.

There is also another problem: (1) In the Device Explorer/Spirit of the transmitter I can only see the channels Throttle, Gyro Gain and Banks and F: Stabi Function. But not any other channels. (2) And in the menu item "Servos" I cannot see the pulse of the cyclic servo?!

Channel mapping (transmitter):
https://www.dropbox.com/s/c0oi28jfr9qe8 ... 1.bmp?dl=0
https://www.dropbox.com/s/i0acle3g1bxea ... 2.bmp?dl=0
https://www.dropbox.com/s/9x8ahzrpceeb2 ... 0.bmp?dl=0

The missing items in the unit (JETI integration): e.g. pulse for cyclic and channel settings
https://www.dropbox.com/s/ipm6apbiji50f ... 5.bmp?dl=0
https://www.dropbox.com/s/fbmxhbuyj95mv ... 4.bmp?dl=0

What is the [2] standing for?
https://www.dropbox.com/s/hk432l64dqszu ... 3.bmp?dl=0

SPIRIT.bin and firmware are up to date.

Kind regards

Christoph


Top
 Profile  
 
PostPosted: Tue 18. Jul 2017 7:40:06 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12213
Hello,

it is correct that the channel numbers are not matching. Each manufacturer has different channel mapping and you can even set channel order differently in the Jeti transmitter.
So the numbers are just relative - important is what they correspond to (function).

Yes, default settings in both will just work (if Jeti channel mapping is really default). You can use our Jeti profile available here:
http://manual.spirit-system.com/index.p ... ntegration

Regarding missing values - servo neutral pulse is always 1520us so there is no reason to make it visible in Jeti.
Channel order of not listed channels should be always in default - there is no reason to change it since you can also always change it in your transmitter.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .