It is currently Thu 28. Mar 2024 13:02:55

All times are UTC + 1 hour





Post new topic Reply to topic  [ 9 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Mon 19. Jun 2017 16:41:04 
Offline

Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
Hello!

I connected my Jivepro120/SpiritPro with the Cable Kontronik cable and connected correctly.
Unfortunately, I get totally wrong RPM signal displayed in the DS16.
I have already set in the JivePro software RPM to 1.00 and MotorPole to 2, but also set normal for an XNova Motor and GearRatio.
Always have wrong RPM in the display.
What do I need to do to get correct RPM signal?

Thank you!
Greeting


Top
 Profile  
 
PostPosted: Mon 19. Jun 2017 16:48:13 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Hi,

you have to set settings in the General - Throttle/Governor window - Sensing Divider and Gear Ratio.
The problem is that in both you can set the same parameters. So they can be configured only in one to display correct values.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 21. Jun 2017 15:54:44 
Offline

Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
I do not use an external sensor!


Top
 Profile  
 
PostPosted: Wed 21. Jun 2017 16:03:00 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Of course, these settings also apply for ESC RPM sensor! :)
To access them, you have to temporarily enable Governor, then disable it after settings.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Wed 21. Jun 2017 16:07:00 
Offline

Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
Ah, Ok!
And in the JivePro I do not?
I have an XNova Motor.


Top
 Profile  
 
PostPosted: Sun 25. Jun 2017 10:24:26 
Offline

Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
Hi!

I now have a lot of settings through.
Unfortunately without a successful result.

My target speed: 1050-1600
Software v 2.4.1

According to Tomas, I set my Gear Ratio to 12.30: 1 and Motor Pole to 5 (XNova) in the Spirit.
(Governor of course deactivated!)
Here I have in the DS16, at Idle 1, of 154 ...?
Now comes a strange component in the game. I switch to Idle 2 and / or 3 decreases the RPM in the DS16 to 5 ... ???

Then I set all the data "the other way round".
In the JivePro my gear Ratio of 12.30: 1 and motor poles set to 10. In Spirit Gear Ratio on 1 and Motor Pole also on 1.
Even then I do not get any result.

Would be pleased if there is someone here, where it works!


Top
 Profile  
 
PostPosted: Sun 25. Jun 2017 20:47:15 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Did you tested it with provided firmware or it is official?

With our Jive Pro 80 it is working nicely when comparing between external RPM sensor.
Everything in default in the ESC. In the Spirit Settings according the motor - Sensing Divider = Motor Pole / 2 (with the latest firmware) and Gear Ratio per model specification.

Tommorow we will be doing another comparison. So I will provide you further details.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Sun 25. Jun 2017 21:30:42 
Offline

Joined: Tue 30. Dec 2014 7:50:36
Posts: 135
Thank you for your efforts!


Top
 Profile  
 
PostPosted: Thu 06. Jul 2017 11:14:57 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12210
Firmware with solution was released right now :)

The problem was, that Kontronik implementation allow that the RPM overflow (it does not fit in the variable they are sending the data). So Spirit have to find when it overflows and correct the data.

But I hope that everything will be fine now.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .