It is currently Thu 28. Mar 2024 18:38:22

All times are UTC + 1 hour





Post new topic Reply to topic  [ 5 posts ] 
  Print view Previous topic | Next topic 
Author Message
PostPosted: Fri 09. Jun 2017 16:57:07 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
I finished yesterday my build.

Motor: Lynx EOX 1611 (5500kV) w/11T pinion
ESC: HW FlyFun 30A V4 (BEC 2A/5V)
FBL: uSpirit 2.4.1
Cyclic: Lynx DS-895-HV Alu Case 0.06 @ 4.5V 20x8x19 JST
Tail: E-flite EFLRDS76T 0.03@4.8V
Batteries: Tattu 1050mAh 3S 75C 73x36x17 XT60 97g
Receiver: Spektrum Satellite x1
Main blades: Stock 190mm black
Tail blades: Stock 38mm black

The BEC Test fails consistently, well, does not "officially" fail, but the light on the Spektrum satellite goes off, and the Log shows "Power Voltage is low" and sometimes "Receiver Signal Lost". The Spirit does not restart, though. But if I run the collective up and down seriously for a few seconds, even out of the BEC Tester, the signal is clearly lost, since it stops responding for a split second.

What could it be?

To me it looks like everything runs / turns smooth, the links move freely in the balls, the swash moves freely up and down (even used some 3-flow)...

The ESC gets already warm though.

Help!

(I'd like to maiden!)

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
PostPosted: Fri 09. Jun 2017 17:47:30 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
The BEC is not able to provide enough current in the peaks, so the voltage is dropping under 2.9V which is too low for satellite.
So it is on the edge. It will work probably well in normal flight, but it is really on the edge.
Adding a small capacitor e.g. to the RUD will solve the issue completely. But this setup is working for others, so hopefully it is not a big problem in the real flight.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 09. Jun 2017 20:01:52 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
Thanks, that's what I was thinking, it's such a standrd Oxy 2 setup!

I have a Spektrum capacitor laying around, I'll try it and find soace for it.

Meanwhile... other uSpirit users? Any reallife experience yet?

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
PostPosted: Fri 09. Jun 2017 20:26:03 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12211
Here we have Talon 25 and no issue with the same servos.

_________________
Spirit System developer


Top
 Profile  
 
PostPosted: Fri 09. Jun 2017 21:56:01 
Offline
User avatar

Joined: Sun 26. Jul 2015 8:17:50
Posts: 433
Location: Madrid, Spain / Torino, Italy
Tried with the capacitor (a pretty big Spektrum one I had in the Goblin 500) and... bingo, no problems at all. I already found space for it, and ready for tomorrow's maiden.

Thanks Spirit guys!

(I feel bad writing "Tomáš" since the writing styles are different at times so it's for sure different guys - a Team job. But the spirit (pardon, the Spirit) is the same - big kudos)

_________________
Oxy 2X-VertWarp 360Blade 450XBlade 450X NightflyerGoblin 500 (RIP) ♦ 2 X mCPX v2 ♦ night fly mQXLadyMQXnano QXnano QX FPVInductrixDX8 G1


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC + 1 hour


Who is online

Users browsing this forum: franz88 and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .