It is currently Thu 23. May 2024 2:10:54

All times are UTC + 1 hour





Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
 Post subject: Re: Scale setup
PostPosted: Tue 27. Oct 2015 18:11:20 
Offline

Joined: Tue 15. Sep 2015 14:43:48
Posts: 13
After much testing, there is still problem.

1. Sometimes stop for a moment the even at full rudder. Rudder servo: Align DS650




2. While pirouette sometimes the heli self aileron direction overthrown. Governance must be strong opposition.




I don't know what setup.
Thank you in advance for your help.


Attachments:
File comment: Current setup
sp7.4ds [255 Bytes]
Downloaded 67 times
Top
 Profile  
 
 Post subject: Re: Scale setup
PostPosted: Wed 28. Oct 2015 10:16:05 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12260
Are you sure that the Pirouette Optimization is correct?
I understand that is is very hard to check it on the ground.

For example when you change rudder servo or rudder mechanics, it can be result for the opposite settings.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Scale setup
PostPosted: Wed 28. Oct 2015 10:50:55 
Offline

Joined: Tue 15. Sep 2015 14:43:48
Posts: 13
The Pirouette Optimization setup correct. Do not every pirouette occur.


Top
 Profile  
 
 Post subject: Re: Scale setup
PostPosted: Wed 28. Oct 2015 14:02:52 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12260
Are you sure that CG is good?
This can cause this issue as well.

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Scale setup
PostPosted: Wed 28. Oct 2015 14:03:57 
Offline

Joined: Tue 15. Sep 2015 14:43:48
Posts: 13
Then tested the rudder servo ball farther.


Top
 Profile  
 
 Post subject: Re: Scale setup
PostPosted: Wed 28. Oct 2015 14:07:00 
Offline

Joined: Tue 15. Sep 2015 14:43:48
Posts: 13
CG correct. Main rotor shaft vertical.


Top
 Profile  
 
 Post subject: Re: Scale setup
PostPosted: Wed 28. Oct 2015 14:08:14 
Offline

Joined: Tue 15. Sep 2015 14:43:48
Posts: 13
The problem may not be that counterclockwise rotation of the rotor?


Top
 Profile  
 
 Post subject: Re: Scale setup
PostPosted: Wed 28. Oct 2015 19:38:28 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12260
This shouldn't be a problem.

Does it happen always only to one side only?

Where is your collective pitch when you are hovering? (approx. position)

_________________
Spirit System developer


Top
 Profile  
 
 Post subject: Re: Scale setup
PostPosted: Wed 28. Oct 2015 20:52:21 
Offline

Joined: Tue 15. Sep 2015 14:43:48
Posts: 13
It occurs in both directions.
Hovering approx 4-5 degree.


Top
 Profile  
 
 Post subject: Re: Scale setup
PostPosted: Fri 30. Oct 2015 8:22:57 
Offline
Site Admin

Joined: Mon 29. Apr 2013 16:06:44
Posts: 12260
It really looks like there is wrong pirouette optimization direction.
This behavior exactly correspond with the state when it is configured in opposite direction.

How did you tested that it is configured properly?
Maybe after initial configuration you have changed Sensor compensation direction for Rudder - this will lead in the problem that it is reversed.

_________________
Spirit System developer


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 20 posts ]  Go to page Previous  1, 2

All times are UTC + 1 hour


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron



Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
skymiles_red v1.0.1 designed by Team -Programming forum-سيارات للبيع .