Spirit System https://www.spirit-system.com/phpBB3/ |
|
Trex 150 https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=3609 |
Page 2 of 2 |
Author: | tomsl [ Fri 25. Oct 2019 19:24:49 ] |
Post subject: | Re: Trex 150 |
with 40% Rudder Gain you can fly but it swings in both directions 20mm. does it make sense to give you my settings? Thank you for your help |
Author: | ZeXx86 [ Tue 29. Oct 2019 23:17:10 ] |
Post subject: | Re: Trex 150 |
Yes please. Send your settings. You can attach it here. |
Author: | tomsl [ Wed 30. Oct 2019 17:31:24 ] | ||
Post subject: | Re: Trex 150 | ||
Hi here my settings Thank you very, very, very much
|
Author: | tomsl [ Tue 05. Nov 2019 17:05:57 ] |
Post subject: | Re: Trex 150 |
Hello what's happening?????? |
Author: | ZeXx86 [ Fri 08. Nov 2019 8:23:34 ] |
Post subject: | Re: Trex 150 |
Hello, here is the special firmware for you: http://spirit-system.com/dl/fw//spirit-fw-2.6.5.4df You can download and flash it. After flashing Pirouette Consistency will behave as if the values are divided by half. So value 160 will work as 80. For the first try I recommend to set value 180 now. I hope it will help you. |
Author: | tomsl [ Fri 08. Nov 2019 17:30:02 ] |
Post subject: | Re: Trex 150 |
Hello Now that's what I call customer service - awesome awesome awesome awesome!!! I`ll tell everyone about my experience with Spirit System in my club. I've already made a few test flights. The problem is almost gone, all I have to do is play with the setting a bit more. Thank you! |
Author: | caven [ Wed 13. Nov 2019 19:34:24 ] |
Post subject: | Re: Trex 150 |
Can you send photo how you install uspirit? Thanks |
Author: | ZeXx86 [ Wed 13. Nov 2019 19:36:54 ] |
Post subject: | Re: Trex 150 |
You are welcome! New official Spirit firmware will be prepared for this. So that you will be able to set much lower values of the Pirouette Consistency. |
Page 2 of 2 | All times are UTC + 1 hour |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |