From the Spektrum website:
"
Spektrum enthusiasts with telemetry capable transmitters such as the DX6, DX8, DX9 or DX18 can now receive on-demand telemetry data, and by using the voice functionality of compatible G2 transmitters, can have specific telemetry data outputted via the on-board audio system."
So I ordered the 4649T-Receiver and it came in today.
I could bind it to my DX8 (gen1), changed the protocol under "General - Receiver" to SRXL/SUMD on the Spirit Pro and hooked the receiver to port RUD as shown under Point 8 (page 19) in the manual.
Unfortunately under "Diagnostic" I cannot see any movement on any channel.
I updated the receiver to V1.1, but no change.
I tested also a hookup with a "Jeti-adapter" as shown under Spektrum Integragtion, but since I use an "old" DX8, it didn't work.
Is there any advice to make it work?
Kluftinger