Spirit System
https://www.spirit-system.com/phpBB3/

Oxy 2 setup
https://www.spirit-system.com/phpBB3/viewtopic.php?f=17&t=2034
Page 1 of 1

Author:  ZeXx86 [ Wed 07. Jun 2017 19:09:48 ]
Post subject:  Oxy 2 setup

Here you can find Oxy 2 setup for 3D.

Motor: stock Lynx, 11t pinion
ESC: Castle Talon 25
Servos: 3x Lynx DS-895-HV, 1x E-flite EFLRDS76TJ
Blades: main - stock plastic, tail - stock plastic 38mm
FBL: uSpirit
Battery: Tattu 3S 850mAh 75C

Flight behavior is rock stable, precise, everything was working from the beginning very well.
There was just one issue of the kit - ball linkages - all were very tight. It was necessary to fix it so everything is butter smooth.
Tail is holding exceptionally well (84% gain), although Travel range is way too big due to short arm (the first hole).

Attachments:
oxy-2.4ds [255 Bytes]
Downloaded 316 times

Page 1 of 1 All times are UTC + 1 hour
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/